Dell EMC VEP1400 Getting Started Manual page 14

• Rack-mounted using the optional rack mount tray
Desktop placement
The VEP1400 includes four rubber feet that provide secure and stable placement of the
unit on a flat surface.
Figure 2. VEP1400 desktop placement
Wall mount installation
The VEP1400 includes the hardware that is required for wall mount installation. Using a
torque screwdriver, affix the wall mount brackets to the VEP1400 using the four M3 screws
included.
WARNING: When mounting the VEP1400 unit to the wall, ensure that unit is
mounted with the parallel ports in the upward position, and where the LED panel
faces the floor.
NOTE: When driving the screws into the bracket and VEP1400 unit, verify that 5
lb-in is the achieved torque setting.
NOTE: If mounting the VEP1400 to the wall using the wall mount bracket
provided, removal of the rubber feet from the bottom of the VEP1400 unit is not
necessary.
Depending on the VEP1400 configuration purchased, you have one of two wall mount
brackets included:
• Wall mount bracket with cross-shaped cutout for the mounting screws
• Wall mount bracket with keyhole cutout for the mounting screws
Wall mount bracket with cross-shaped cutout for the mounting screws
14