1-Channel Module Parameter Data (Rio3-Rs232) - Hitachi HX-RIO3 Series User Manual

14
Configuration Parameter Data
Precautions for use: if you changed Parameter, you must reset Module

4.1.1 1-Channel Module Parameter Data (RIO3-RS232)

- byte#0~1 for ch#0, byte#2~3 not used
* Note 1:
- Disable: Transmit immediately Output data
- Enable: Store the value of Output Data continually at TxD Buffer of Serial Interface Module, when TPA
bit and TPR bit of Control Byte and Status Byte are different, transmit all Data that saved at TxD Buffer
HX-RIO3 Series