Mounting; I/O Inserting And Removing Devices - Hitachi HX-RIO3 Series User Manual

30
HX-RIO3 Series

6 Mounting

Caution!
Hot surface!
The surface of the housing can become hot during operation. If the device was operated at high ambient
temperatures, allow it to cool off before touching it.
Notice!
Perform work on devices only if they are de-energized!
Working on energized devices can damage them. Therefore, turn off the power supply before working on the
devices.

6.1 I/O Inserting and Removing Devices

As above figure in order to safeguard the RIO3-Module from jamming, it should be fixed onto the DIN rail with
locking level. To do so, fold on the upper of the locking lever.
To pull out the RIO3-Module, unfold the locking lever as below figure.