Safety Labels - Priefert FMX Operator's Manual

Safety

Safety Labels

Your implement comes equipped with all safety labels in place.
They were designed to help you safely operate your implement.
1. Read and follow their directions.
2. Keep all safety labels clean and legible.
3. Replace all damaged or missing labels. To order new labels
go to your nearest Priefert Dealer.
4. Some new equipment installed during repair requires safety
labels to be affixed to the replaced component as specified by
Priefert. When ordering new components make sure the correct
safety labels are included in the request.
5. Refer to this section for proper label placement.
To install new labels:
1. Clean the area the label is to be placed.
2. Wipe the surface dry.
3. Peel backing from label.
4. Press firmly onto the surface.
Use a small straight edge plastic (credit card) to squeeze out air bubbles
working from the center out towards the sides.
9