Rmx Models - Priefert FMX Operator's Manual

Section 5: Specifications
Working Width
Overall Width
Overall Length (Including Tail-Wheel)
Weight (with Front Guard)
High Blade Speed Tip
FPM (Feet Per Minute)
Blades Heat Treated Alloy Steel
- Free Swing Blades
Deck Height
(underside of deck to bottom of skid)
Deck Material Thickness
Deck Design
Minimum Horsepower Rating
Gearbox
Gearbox Oil
Cutting Height
Cutting Capacity
Safety Guards
Skids
Stump Jumper
Driveline
Driveline Safety Protection
Tail-Wheel
Heavy Duty Spindle on Tail-Wheel
26
1-1/2" Bolt and Nut
Minimum
25 HP
Vertical mount 90
Spline Output with hub. 540 rpm PTO Driven
Gearbox 1:1:47 Cast Iron Housing
Shielded Series 4 PTO Driveline Shaft 29" with
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE!
RMX MODEL SPECIFICATIONS
RMX500
60"
67"
94"
570 lbs
Ensures a clean cut.
12,469 FPM
1/2" x 3 1/2" x 22"
Heat Treated Alloy Steel -
Free swing blades
Fully welded for additional strength.
Shaped to discharge grass more effectively than other models.
Maximum
40 HP
o
with Spline Input and tapered
SAE 85W-140EP
Oil Capacity 23 Oz (.68 Liters)
1-3/4" - 12"
Grass, weeds and brush not to exceed 1" dia.
Protects against flying object hazards. Rubber (Front and Rear)
or Optional Chain Guard (Front and Rear).
Provides sidewall reinforcement and full protection to bottom sidewall.
3/8" x 2" weld on.
Allows mower to slide over obstructions while protecting the gearbox output shaft.
Oval Pan 1/4" thickness.
Slip clutch driveline offers convenience for continual work.
1-3/8" 6-Spline and 2– Disk Slip Clutch
4" x 8" x 15" Laminated Tire.
1-1/2" Spindle gives the strength to protect tail-wheel assembly.
RMX600
72"
79"
107"
729 lbs
14,963 FPM
1/2" x 4" x 26"
Heat Treated Alloy Steel
Free swing blades
8 3/8"
10 Gauge
Minimum Maximum
40 HP
o
Vertical mount 90 with Spline Input and tapered
Spline output with hub. 540 rpm PTO Driven
Gearbox 1:1:46 Cast Iron Housing
SAE 85W-140EP
Oil Capacity 33 Oz (.90 Liters)
Shielded Series 5 PTO Driveline Shaft 34" with
1-3/8" 6-Spline and 2– Disk Slip Clutch
65 HP