en
Preparation using ground coffee
The milk is dispensed into the cup or glass
first. Then the coffee is brewed and runs
into the cup or glass�
Press C again to stop the current step of
the process prematurely�
Milk froth or warm milk
■ Place a cup or glass underneath the
beverage outlet�
■ Turn the control ring and select
"Milk froth" or "Warm milk"�
F
The settings can be changed as
described in the section "Drink
adjustment"�
■ Press C to start dispensing�
Milk froth or warm milk is dispensed from
the beverage outlet�
Press C again to prematurely halt the
dispensing process�
Preparation using
ground coffee
F
When using ground coffee, the
setting for the strength of the coffee
and dispensing two cups at once is
not available�
Important: Remove cups or
glasses before opening the door
in case they fall�
The appliance must be ready for use�
■ Open the appliance door�
■ Remove the ground coffee drawer.
The removable drawer must be dry�
■ Put in coffee powder (maximum 2 level
measuring spoons); do not press firmly.
F
Caution!
Do not use whole beans or instant
coffee.
■ Replace the ground coffee drawer.
■ Close the appliance door�
F
If coffee is not dispensed within
90 seconds, the brewing chamber
empties automatically to avoid an
overflow� The appliance is then
rinsed�
44
THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
■ Place a cup underneath the beverage
outlet�
■ Turn the control ring and select a coffee
drink or a coffee drink with milk.
The display shows the selected drink, a
measuring spoon and the preset values for
this drink�
F
The settings can be changed as
described in the section "Drink
adjustment"�
For coffee drinks with milk, please
observe the instructions in the
section "Preparation using milk"�
■ Press C to start dispensing�
The coffee is brewed and then dispensed
into the cup. When selecting coffee drinks
with milk, the milk is first dispensed and
then the coffee brewed.
F
For another drink with ground coffee,
repeat the procedure�
Dispensing hot water
B
Risk of burns!
The beverage outlet gets very hot�
After use, always let it cool down
before you touch it�
The appliance must be ready for use�
■ Remove the milk tube from the milk
container�
■ Remove any milk or coffee residue from
the outlet�
■ Place a cup or glass underneath the
beverage outlet�
■ Turn the control ring and select
"Hot water"�
F
The settings can be changed as
described in the section "Drink
adjustment"�
■ Press C to start dispensing�
■ The message appears "Milk hose
separated from milk container?"�
■ If still connected, remove the milk tube
and touch [ Y es ] on the display�
Hot water flows out of the beverage outlet.
Press C again to prematurely halt the
dispensing process�
Need help?
Do you have a question about the CTL636ES6 and is the answer not in the manual?
Questions and answers