Loading/Ejecting Cassettes - Panasonic AG-DV2500P Operating Instructions Manual

PREPARATION
Please use standard DV cassettes or mini DV cassettes.
POWER
A.DUB
DVCAM
AG-DV2500
1 / 3
MIC REMOTE INPUT CH
OFF LINE 2 / 4
9PIN WIRELESS DV S-VIDEO
Standard DV cassettes
Slide
REC
SAVE
Cassette indicator
A.DUB
DVCAM NTSC PAL REC INH.
1 / 3
INPUT CH
LINE 2 / 4
AUDIO
DV S-VIDEO
Memo
•
The cassette can be loaded/
ejected even when the unit is
in the POWER OFF mode.
•
The loading/ejection process
takes about 6 seconds.
•
Ejection cannot be done with
the wireless remote controller.
EJECT
MENU
REC PLAY PAUSE
NTSC PAL REC INH.
SET
REW FF
STOP
AUDIO
Loading the cassette
1.
Check the cassette.
• Set the rear slide.
Push it to "REC" for recording or "SAVE" to prevent lighted con-
tents from being erased accidentally.
• Check that the tape is not slackened.
2.
Check that the cassette indicator on the unit is unlit.
EJECT When a cassette is loaded, the cassette indicator will lit up.
3.
MENU
Load the cassette.
REC PLAY PAUSE
• For the standard DV cassette, just align it with the cassette slot
SET
REW FF
and insert.
STOP
• For the mini DV cassette, load it in between the left and right guides.
Set the tape, window face up, and push the cassette in slowly
EJECT button
until it is drawn in automatically.
¥ While the cassette is being loaded, the cassette indicator blinks.
Ejecting the cassette
1.
Press the EJECT button on the unit.
¥ Ejection begins. During ejection, the cassette indicator blinks.
2.
Eject the cassette.
– Loading/ejecting cassettes –
POWER
AG-DV2500
MIC
9PIN
The indicator lights up when cassette loading is complete.
Guide
A.DUB
DVCAM NTSC PAL REC INH.
1 / 3
REMOTE INPUT CH
OFF LINE 2 / 4
AUDIO
WIRELESS DV S-VIDEO
Mini DV cassettes
EJECT
MENU
REC PLAY PAUSE
SET
REW FF
STOP
E-29