Set Up And Switch On Your Phone - Nokia 110 4G User Manual

Nokia 110 4G User Guide
Note: You can set the phone to ask for a security code to protect your privacy and personal
data. The pre-set code is 12345. To change the code, select Menu > Settings > Security >
Phone locked , make up a code with 4-8 digits, and select OK . Note, however, that you need
to remember the code, as HMD Global is not able to open or bypass it.
Parts and connectors, magnetism
Do not connect to products that create an output signal, as this may damage the device. Do
not connect any voltage source to the audio connector. If you connect an external device
or headset, other than those approved for use with this device, to the audio connector, pay
special attention to volume levels.
Parts of the device are magnetic. Metallic materials may be attracted to the device. Do not
place credit cards or other magnetic stripe cards near the device for extended periods of time,
since the cards may be damaged.

SET UP AND SWITCH ON YOUR PHONE

Nano-SIM
Important: This device is designed to be used with a nano-SIM card only. Use of incompatible
SIM cards may damage the card or the device, and may corrupt data stored on the card.
Note: Switch the device off and disconnect the charger and any other device before removing
any covers. Avoid touching electronic components while changing any covers. Always store
and use the device with any covers attached.
© 2023 HMD Global Oy. All rights reserved. 6