Page 1
USER MANUAL AND SPECIFICATIONS BLUES & BLUES COMFORT SLEEPER CHAIR 9200-0735 LINET spol. s r. o. Tel.: 312 / 576 111 Želevčice 5 Fax: 312 / 522 668 274 01 Slaný E-mail: info@linet.cz Date 6/2016 Version...
Schematic ........................7 BLUES............................7 BLUES COMFORT ........................8 Chair installation ......................8 Chair operation ......................9 Extending and retracting the BLUES chair ................9 Extending and retracting the BLUES COMFORT chair ............10 Care instructions ....................... 11 Cover materials ........................11 9.1.1 Textile ............................11...
Introduction The BLUES sleeper chair is intended for comfortable sitting, but it can also be used as a bed for a friend or relative in hospitals, maternity units, or clinical facilities. The individual types differ by virtue of the material used for upholstery.
Only the part designed for sitting, i.e., the seat, serves this purpose. Sitting on the armrests or back rest is not permitted. Proceed according to the user manual during maintenance and cleaning. BLUES User Manual Date 6/16 Version...
410 mm Overall depth 870 mm Sleeping platform height 410 mm Sleeping platform 1990 x 670 mm dimensions Total length opened 2030 mm Opening mechanism Metal construction Table 1- Specifications of BLUES chair BLUES User Manual Date 6/16 Version Status Status...
Sleeping platform dimensions 1920 mm Opening mechanism Metal construction Table 2 - Specifications of BLUES COMFORT chair Conditions for use The chair may only be used in an environment where: the ambient temperature ranges between + 10°C to + 40°C ...
Schematic BLUES Fig. 1 - Schematic of BLUES chair Cushion Seat Backrest Armrest Opening mechanism metal support The backrest folds down as part of the sleeping platform Metal feet Wheels (or feet) for easier handling NOTE: The cushion is not a part of the standard version of the chair.
BLUES COMFORT Fig 2 - Schematic of BLUES COMFORT chair Armrest Upper part of seat Lower part of seat – slide-out section Varnished solid end board Backrest Caster wheels with brake Chair installation The chair is supplied pre-assembled. Check the delivery against the shipping note for completeness. Check to see whether there has been evident damage to the chair during transport and record any problems on the shipping note or submit it in writing to the manufacturer or seller.
Proceed carefully and ensure that there is fabric or a carpet underneath when the chair is being pushed across a floor, as damage to the floor surface may occur. Extending and retracting the BLUES chair Before extending, first remove the cushions and backrest from the chair Grasp the front of the seat using one hand, using the other hand to grasp the loop at the rear.
Extending and retracting the BLUES COMFORT chair Before extending the chair, the brakes on the front wheels must be locked. Using one hand, grasp the leatherette loop located at the front of the chair and pull it towards yourself as far as possible.
Do not put in a dryer! Do not scrub! 10 Environmental protection LINET, spol. s r.o. is aware of the need to protect the environment for future generations, and so it invests great attention to development and innovation – design, production, and the use of environmentally friendly technologies and materials.
The manufacturer will conduct guarantee and post-guarantee servicing, or it may be performed by an authorised servicing organisation on the basis of a certificate of competence for these activities. The manufacturer issues the relevant certificate. 12 Contacts LINET spol. s r.o. Želevčice 5, 274 01 Slaný Address your questions to: Sales department: Tel.:...
Need help?
Do you have a question about the BLUES and is the answer not in the manual?
Questions and answers