Subscribe to Our Youtube Channel
Related Manuals for Osmio MINISOFT
Summary of Contents for Osmio MINISOFT
- Page 1 OSMIO MINISOFT USER MANUAL Version Number Date 08/09/20 TELEPHONE: 0330 113 7181 EMAIL: info@osmiowater.co.uk...
- Page 2 When in any doubt while reading this manual or for any other questions regarding use and maintenance of the equipment please contact Osmio Water on 0330 113 7181 or send an email to: info@osmiowater.co.uk.
- Page 3 Water Treatment This product is a hydrodynamic feeder of food grade polyphosphates (patented system) for descaling and anticorrosion treatment as per UNI CTI 8065 standards and complies with D.M.174/2004 and the Ministerial Decree 25/2012 for drinking water treatment. The system proportionally doses the water with the correct dosage of polyphosphate to maintain water potability.
- Page 4 It can be plumbed directly onto the cold water supply to the property, protecting the whole hot water system, or to an individual appliance. Once you have located the area where the MiniSOFT will be fitted, check to make sure you have enough room. Please allow at least two inches of clearance from the bottom of the system to the floor to allow enough space to drop the bowl down when taking it on and off to refill with media.
- Page 5 For high quality plumbing parts and pressure reducing valves we recommend you shop at Screwfix. If you are having the system professionally installed by a plumber, please provide them with the product information prior to installation. The MiniSOFT is designed to be fitted on 15 mm pipework.
- Page 6 Installing the MiniSOFT Mount the MiniSOFT in a suitable location after the stopcock and connect to the incoming water main. Install the product on the existing pipework after the stopcock using the fittings required for installation on your pipework. Ensure the MiniSOFT is mounted horizontally with 2” clearance at the bottom to allow the bowl to be dropped down when replacing the media.
- Page 7 Through its movement, the system guarantees a constant feed of polyphosphates. The water that is delivered into the media bowl, enables the correct dose of polyphosphate to be delivered. Inside the MiniSOFT there is a bellows that constantly sucks in the saturated solution.
- Page 8 Inserting the media Step 1 Block the water flow to the dispenser using the Bypass valve by-pass valve. Turn the lever lever (picture counterclockwise a 1/4 turn shows lever so the lever is horizontal. in vertical position) Step 2 Vent the system using the pressure release valve by turning it to release pressure.
- Page 9 Inserting the media Step 4 Pour the polyphosphate media up to the level indicated or insert a pre-compressed polyphosphate refill. Fill level Step 5 Replace the bowl securely back on, screw the ring nut back up. Then move the bypass lever in a clockwise direction to open the flow of water.
- Page 10 We hereby declare that the MiniSOFT polyphosphate refills composition and the recommended dosage are in accordance with the requirements of the FAO/WHO Expert Committee on Food Additives and it is produced in accordance with UNI EN...
- Page 11 Disclaimer Osmio Water reserves the right to change its products and services at any time to incorporate technological developments. This manual is subject to change without prior notice as part of continuous product development. Although this manual has...
- Page 12 OSMIO MINISOFT USER MANUAL Osmio Solutions Ltd, Buckland Lake Reserve, Buckland Road, Cliffe Nr Rochester ME3 7RT www.osmiowater.co.uk TELEPHONE: 0330 113 7181 EMAIL: info@osmiowater.co.uk...
Need help?
Do you have a question about the MINISOFT and is the answer not in the manual?
Questions and answers