Related Manuals for Osmio MAXISOFT
Summary of Contents for Osmio MAXISOFT
- Page 1 OSMIO MAXISOFT USER MANUAL Version Date 10/09/2020 TELEPHONE: 0330 113 7181 EMAIL: info@osmiowater.co.uk...
- Page 2 When in any doubt while reading this manual or for any other questions regarding use and maintenance of the equipment please contact Osmio Water on 0330 113 7181 or send an email to: info@osmiowater.co.uk...
- Page 3 Water Treatment This product is a hydrodynamic feeder of food grade polyphosphates (patented system) for descaling and anticorrosion treatment as per UNI CTI 8065 standards and complies with D.M.174/2004 and the Ministerial Decree 25/2012 for drinking water treatment. The system proportionally doses the water with the correct dosage of polyphosphate to maintain water potability.
- Page 4 Once you have located where your internal stopcock is and where the cold pipe goes before it branches off around the property then you can plan where you are going to install the MaxiSOFT. Installation can occur at any suitable point before the pipe branches off.
- Page 5 The system comes with 3/4” and 1” BSPP Female connectors. The MaxiSOFT is designed to be fitted on 22 mm pipework, maximum water pressure: 12 Bar...
- Page 6 The water must flow in the direction of the arrow shown on top of the system. You can remove the 4 screws on the MaxiSOFT and reposition the system to change the direction of the arrow to match the flow of water through your pipework.
- Page 7 Through its movement, the system guarantees a constant feed of polyphosphates. The water that is delivered into the media bowl, enables the correct dose of polyphosphate to be delivered. Inside the MaxiSOFT there is a bellows that constantly sucks in the saturated solution.
- Page 8 Block the water flow to the dispenser by either turning off the stopcock or if you have in- stalled a bypass - bypass the water to the MaxiSOFT. Step 2 Vent the system using the pressure release valve by turning it to open it and Pressure release release pressure.
- Page 9 Inserting the media Step 4 Pour the polyphosphate media up to the level indicated on the bowl. Fill level Step 5 Replace the bowl securely back on and screw the ring nut back up. Then tighten this using the housing spanner. Take care not to cross thread the ring nut...
- Page 10 Declaration of Conformity We hereby certify that MaxiSOFT polyphosphate doser is made using the following parts: - Brass OT 58 - Polyamide Trogamid - Non-toxic rubber We declare that the above listed product is manufactured in compliance with 98/83/CE directive concerning regulation of materials and objects that can be used inpermanent plants for collection, treatment and distribution of water intended for human consumption.
- Page 11 Disclaimer Osmio Water reserves the right to change its products and services at any time to incorporate technological developments. This manual is subject to change without prior notice as part of continuous product development. Although this manual has...
- Page 12 OSMIO MINISOFT USER MANUAL Osmio Solutions Ltd, Buckland Lake Reserve, Buckland Road, Cliffe Nr Rochester ME3 7RT www.osmiowater.co.uk TELEPHONE: 0330 113 7181 EMAIL: info@osmiowater.co.uk...
Need help?
Do you have a question about the MAXISOFT and is the answer not in the manual?
Questions and answers