Conair Infinity S5 Instruction & Styling Manual

IMPORTANT SAFETY
disabilities.
4. Use this appliance only for its intended
INSTRUCTIONS
use, as described in this manual. Do not
use attachments not recommended by the
When using electrical appliances, especially manufacturer.
5. Never operate this appliance if it has a
when children are present, basic safety
precautions should always be followed, damaged cord or plug, if it is not working
including the following: properly or if it has been dropped or dam-
aged, or dropped into water. Return the
READ ALL INSTRUCTIONS
appliance to an authorized service center
BEFORE USING.
for examination and repair.
6. Keep the cord away from heated surfaces.
KEEP AWAY FROM
7. Never use while sleeping.
8. Never drop or insert any object into any
WATER
opening.
9. Do not use outdoors or operate where
DANGER
aerosol (spray) products are being used or
-
Any appliance is elec-
where oxygen is being administered.
trically live even when the switch is off. To
10. Unit is hot when in use. Do not let
reduce the risk of death by electric shock:
heated surfaces touch eyes or bare skin.
11. Do not place the heated unit directly on
1. Always unplug appliance immediately
after using. any surface while it is hot or plugged in.
2. Do not use while bathing. 12. Never block the air openings of the
3. Do not place or store appliance where it appliance or place on a soft surface such
as a bed or couch, where the air openings
can fall or be pulled into a tub or sink.
may be blocked. Keep the air opening free
4. Do not place in, or drop into, water or
other liquid. of lint and other debris.
5. If an appliance falls into water, unplug it 13. Do not use an extension cord with this
immediately. Do not reach into the water. appliance.
14. Do not touch hot surfaces of the appli-
WARNING -
To reduce the risk of burns,
ance. Use handles or knobs.
electrocution, fire, or injury to persons:
15. Do not attempt to touch the housing
1. This appliance should never be left unat- of your appliance near the straightening
tended when plugged in. plates, as it is hot when in use.
2. Do not pull, twist, or wrap line cord
around appliance.
3. This appliance should not be used by, on INSTRUCTIONS
or near children or individuals with certain
OPERATING
INSTRUCTIONS
This deep wave iron is intended for house-
hold use. Use on Alternating Current (60
hertz) only. This unit is designed to be oper-
ated at 120 volts AC.
This appliance has a polarized plug (one
blade is wider than the other.) As a safety
feature, this plug will fit in a polarized outlet
only one way. If the plug does not fit fully
in the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician. Do not
attempt to defeat this safety feature.
TO DEEP WAVE HAIR
Hair should be clean and damp or dry
before using the deep wave iron. For best
results, use a light styling product before
blow-drying hair. Plug the iron into an
electrical outlet. Turn on unit. The Power/
Low 285 º F default setting will become
illuminated.
To turn off, press On/Off button. Never leave
your Deep Waver™ on and unattended.
However, should you fail to turn the unit off,
it will shut itself off automatically within
60 minutes.
WARNING: The Deep Waver
and ceramic-coated plates will get very
hot within a few seconds and should not
be placed in contact with the skin after
SAVE THESE
the Deep Waver™ has been turned on.
GETTING STARTED USING
YOUR DEEP WAVER ™ IRON
The iron's unique 5 ultra-high heat temperature
settings and instant heat technology provide
styling versatility for all hair types. If you have
fine hair, a low temperature will provide the
best results. If you have thick, wavy or hard-
to-style hair, keep the heat setting on high. You
can vary the iron's temperature according to
your particular need!
Temperature Setting Guide
LED TEMP. CONTROL HAIR TYPE
Power/Low 285ºF Delicate, thin, easy-to-style hair
Medium 310ºF Average to thick or treated hair
Med/High 330ºF Thick hair
High/Max 360ºF–395ºF Hard-to-style hair
Start with a hair section that is 1 ⁄ " wide
1
2
and no more than ⁄ " thick. Open the iron
1
2
and place a hair section between the two
hot plates, close to the scalp. Trap hair
between the plates by firmly squeezing the
handles together. Once deep wave is set,
release and move deep waver down hair
strand creating a series of deep waves.
At the end of hair section, release the
pressure on the handle and allow the
tourmaline
™
hair section to slide out. Repeat process
on additional sections of hair until you
achieve the hair style you desire. It may
be necessary to repeat process on certain
areas, depending on the texture of your hair.
Some experience is necessary when learning
to use this Deep Waver™. After using the iron
several times, you will learn the ideal way to USING INSTANT HEAT, THE 5 ULTRA-
deep wave and style your hair. HIGH HEAT TEMPERATURE SETTINGS
& UNIFORM HEAT RECOVERY SYSTEM
STYLING WITH THE NEW EASY-GLIDE
TOURMALINE CERAMIC COATED PLATES This styling iron features a powerful
™
ceramic heater that maintains temperature
The plates of your new
during use for precision styling. It heats up
deep wave iron have a
to the temperature you've selected for your
tourmaline-infused easy-
hair type.
glide ceramic surface,
the latest in technological This Instant Heat technology has 5 ultra-
advances. The crushed high heat temperature settings. There is a
tourmaline jewels provide temperature range that's gentle and safe for
ionic and infrared benefits, and combined every type of hair, from the finest to the most
with ceramic technology produce the resistant and helps you create the look you
ultimate in healthy, shiny, want. And that's not all. Conair's professional
silky hair. The Tourmaline salon standards of engineering provide you
Ceramic surface also with a uniform and improved heat recovery
™
helps smooth down system that maintains the iron at constant
flyaways and frizzies. As temperatures. There is a constant surge of
you deep wave your hair, power to ensure that heat is continuously and
heat is evenly distributed quickly delivered for optimal styling results,
so that the style you create has silky, salon- unlike other units that lose heat during use.
perfect deep waves. Hair also glides right This provides consistent styling power so that
through the plates while styling. every strand of your hair is set with the same
level of heat and comes out the same way for
The new Tourmaline
a perfect finish.
Ceramic technology
™
is a pleasure to work with,
makes styling your hair
easier and provides more
professional results.
You'll find not only that hair
glides easily over the surface of the plates as
you're styling, but it's simpler to clean styling
products residue, etc. off after each use.