Conair miniPRO SS2C Instruction & Styling Manual

USER MAINTENANCE
Your straightening iron is virtually maintenance-
free. No lubrication is needed. Keep all vents
and openings clear of dirt and dust. If cleaning
becomes necessary, disconnect the unit from
the power source, allow to cool and wipe ex-
terior with a cloth. If any abnormal condition
occurs, unplug the unit, allow it to cool, and
return it for repair to an authorized service
representative only. No repairs should be at-
tempted by the consumer.
CAUTION
NEVER allow the power supply cord to be pulled,
twisted, or severely bent. Never wrap the cord
tightly around the appliance. Damage will
occur at the high flex point of entry into the
appliance, causing it to rupture and short.
Inspect the cord frequently for damage. Stop
use immediately if damage is visible or if unit
stops or operates intermittently.
STORAGE
When not in use, your appliance is easy to
store. Allow appliance to cool, then store out
of reach of children in a safe, dry location. Do
not jerk or strain cord at plug connections.
WARNING:
IF YOU THINk
THE POWER IS OFF
WHEN THE SWITCH
IS OFF,
YOU'RE WRONG.
KEEP AWAY FROM WATER
Everyone knows that electricity and water
are a dangerous combination. But did you
know that an electric appliance is still
electrically live even if the switch is off?
If the plug is in, the power is on. So when
you are not using your appliances, keep
them unplugged.
ALWAYS UNPLUG
SMALL APPLIANCES