Setup Of The Virtual Port - Relay PW250 User Manual

PW250

3.6.4 Setup of the virtual port

The next step is the setup of a virtual, serial port in your PC. You don´t need the virtual port if the used software
offers a TCP/IP port instead of serial ports. In this case you must correctly program all settings of the serial
interface like baudrate, parity and data bits. You also don´t need a virtual port in the bridge mode (two device
servers connected together, i.e. one TCP001 (serial device server) to the PW250.
Please start the Tibbo – DS Manager (Start – Programs – Tibbo – Tibbo Device Server Toolkit –
Tibbo VSP Manager.
Please add a VSP (virtual serial port) by clicking on the "ADD" button.
PW250 · User Manual Version 1.1 – 11 / 2019 13