Table of Contents
Advertisement
To deactivate the function: touch
The symbol turns white. The previous
heat setting comes on.
7.2 Lock
You can lock the control panel while the
hob operates. It prevents an accidental
change of the heat setting.
Set the heat setting first.
To activate the function: touch
symbol turns red and blinks.
To deactivate the function: touch
The symbol turns white.
When you deactivate the
hob, you also deactivate this
function.
7.3 Child Safety Device
This function prevents an accidental
operation of the hob.
To activate the function: activate the
hob. Do not set the heat setting. Touch
until it turns red and the control bar
disappears.
To deactivate the function: activate the
hob. Do not set the heat setting. Touch
until it turns white and the control bar
appears. Deactivate the hob.
7.4 OffSound Control
(Deactivating and activating
the sounds)
Deactivate the hob. Press
seconds. The display comes on and
goes out. Press
for 3 seconds.
appears. Press
choose one of the following:
•
- the sounds are off
•
- the sounds are on
To confirm your selection wait until the
hob deactivates automatically.
When the function is set to
hear the sounds only when:
• you touch
• Minute Minder comes down
.
. The
.
for 3
or
of the timer to
you can
• Count Down Timer comes down
• you put something on the control
panel.
7.5 Power management
If multiple zones are active and the
consumed power exceeds the limitation
of the power supply, this function divides
the available power between all cooking
zones. The hob controls heat settings to
protect the fuses of the house
installation.
• Cooking zones are grouped according
to the location and number of the
phases in the hob. Each phase has a
maximum electricity loading of 3680
W. If the hob reaches the limit of
maximum available power within one
phase, the power of the cooking
zones will be automatically reduced.
• For cooking zones that have a
reduced power, the control panel
shows the maximum possible heat
settings.
• If a higher heat setting is not available
reduce it for the other cooking zones
first.
• The activation of the function depends
on the number and size of pots.
Refer to the illustration for possible
combinations in which power can be
distributed among the cooking zones.
7.6 Hob²Hood
It is an advanced automatic function
which connects the hob to a special
hood. Both the hob and the hood have
an infrared signal communicator. The
speed of the fan is defined automatically
on the basis of the mode setting and the
temperature of the hottest cookware on
ENGLISH
15
Advertisement
Table of Contents
