Samsung DW80R5061 Series Service Manual page 56

PROBLEM
Will not start.
It's taking too long with an operation or cycle.
There are food particles remaining on dishes.
There are food particles remaining on dishes.
Leaves glasses with a dim polish.
54 _ Troubleshooting
POSSIBLE CAUSE
The door is not closed completely.
The power cable is not connected.
The water supply does not work.
Control panel is locked.
A circuit breaker is open.
Cold water is being supplied.
You selected an inappropriate cycle.
The water temperature is low.
Low water pressure.
The water is too hard.
Dishwasher detergent was not
used.
Detergent remains in the dispenser.
There is no rinse aid.
The dishes are improperly loaded.
Too many dishes have been
loaded.
The water supplied is soft and too
much detergent was used.
Aluminum dishes were included in
the wash load.
Check that the door is latched and closed completely.
Connect the power cable properly.
Check that the water supply valve is open.
Reset the circuit breaker.
Check that the water supply line is connected to a hot water supply.
Connect the water supply line to a hot water supply.
We recommend a powder or gel type dishwasher detergent.
Make sure large items such as cookie sheets, cutting boards, or contaners, etc.
are not blocking the detergent dispenser and preventing it from opening properly.
Rearrange the dishes so they do not interfere with detergent dispenser operation.
Check the dispenser and add the rinse aid.
operation.
Load only an appropriate number of dishes.
Remove the marks on the dishes using a low sensitivity cleaner.
SOLUTION