Samsung DW80R5061 Series Service Manual page 33

Part
Base
Reassembly is in the reverse order of the removal.
Figure
Preparation:
•
1. Remove the eight (8) screws on the base plate both-
3. Remove the cover PCB and pull out the case PCB
4. Disconnect the wire connectors from Assy Sump.
6. Remove other parts as needed to remove the base.
Description
Disassemble the frame L/R and the shutter.
- Refer to each disassembly section.
sides.
and disconnect the wire connectors.
Disassembly and Reassembly _ 31