Download Print this page

ClinchFX Burnish Boost Quick Start Manual

Advertisement

Quick Links

Driving other pedals
The output impedance of the ClinchFX Burnish Boost is low enough to drive
any pedal that can be driven by a guitar.
Where in the signal chain?
The Burnish Boost can be used to push a hot signal into OD and distortion
pedals. It can be used as the last pedal before the amp to push the amp
input stage into breakup.
It can be used at low level settings as an always on tone enhancer, giving mid
presence and a big sound, or as a simple lead boost.
We suggest that you try the Burnish Boost in a number of different positions
in the chain, and find what works best for you.. It is really about finding a tone
that you like best.
Enjoy!
Burnish Boost Specifications:
Approximately 700KΩ
Input Impedance:
Output Impedance:
Approximately 10KΩ
External Power:
9V-18V DC @<6mA, 2.1mm DC plug, centre
negative.
Warranty
Burnish Boost
The ClinchFX
is covered against manufacturing defects for a period of
one year from date of purchase. At our discretion we will either repair or replace faulty
units. We will not accept responsibility for failures in other connected equipment.
Warranty does not cover failures resulting from misuse including, but not limited to:
Immersion in liquids, physical damage, incorrect power supply, unauthorized
modifications, faults in connected equipment, acts of God, etc.
Return shipping and insurance costs shall be the responsibility of the owner.
Should you wish to make a warranty claim, please notify us using the "contact us"
www.clinchfx.com
page at
quoting pedal serial number, purchase date, contact
details and proof of purchase from ClinchFX or an authorized retailer. We will then
contact you to make arrangements for return or replacement. Should we have an
authorized service agent in your area, we may direct you to that agent.
4
Burnish Boost
www.clinchfx.com
Health and Safety Notice
It is the sole responsibility of the user to ensure that this pedal and any
associated cables and equipment are used in a manner that will not
present a danger to either the user or any other person, in
conformance with any applicable health and safety laws. ClinchFX
accepts no responsibility for any personal injury or damage of any kind
resulting from improper use of this pedal.
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the Burnish Boost and is the answer not in the manual?

Questions and answers

Summary of Contents for ClinchFX Burnish Boost

  • Page 1 Where in the signal chain? Burnish Boost The Burnish Boost can be used to push a hot signal into OD and distortion pedals. It can be used as the last pedal before the amp to push the amp input stage into breakup.
  • Page 2 To access the battery compartment, peel off the non-slip base, which is attached with genuine Velcro, commercial quality, hook and loop tape. A friend calls our EP-PRE a “Tone Polisher”. Our Burnish Boost is more a Remove the four screws that hold the bottom of the box in place.