Download Print this page

ClinchFX Clean Boost EP+ Operating Instructions

Advertisement

Quick Links

Driving other pedals
The EP+ has much lower output impedance than the EP-PRE. This makes the EP+
capable of driving most other pedals. In spite of this, we don't recommend using it
before some of the lower impedance vintage Fuzz pedals because most vintage fuzz
pedals rely on direct interaction with guitar pickups.
Where in the signal chain?
We have been using the EP+ in the same position as the EP-PRE, after dirt pedals
and before modulation. We have also found that the EP+ can push the preamp
section of a tube amp into smooth overdrive tones.
The bottom line is, try the EP+ before and after all of your other pedals and find your
own preference. We would love to see everyone's favorite setups on the forums.
Enjoy!
Warranty
The ClinchFX EP+ is covered against manufacturing defects for a period of one year
from date of purchase. At our discretion we will either repair or replace faulty units.
We will not accept responsibility for failures in other connected equipment.
Warranty does not cover failures resulting from misuse including, but not limited to:
Immersion in liquids, physical damage, incorrect power supply, unauthorized
modifications, faults in connected equipment, acts of God, etc.
Return shipping and insurance costs shall be the responsibility of the owner.
Should you wish to make a warranty claim, please notify us using the "contact us"
page at
www.clinchfx.com
quoting pedal serial number, purchase date, contact details
and proof of purchase from ClinchFX or an authorized retailer. We will then contact
you to make arrangements for return or replacement. Should we have an authorized
service agent in your area, we may direct you to that agent.
4
ClinchFX
EP+
Clean Boost
www.clinchfx.com
Warning
It is the sole responsibility of the user to ensure that this pedal and any
associated cables and equipment are used in a manner that will not
present a danger to either the user or any other person, in
conformance with any applicable health and safety laws. ClinchFX
accepts no responsibility for any personal injury or damage of any kind
resulting from improper use of this pedal.
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the Clean Boost EP+ and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for ClinchFX Clean Boost EP+

  • Page 1 We would love to see everyone’s favorite setups on the forums. Enjoy! Warranty The ClinchFX EP+ is covered against manufacturing defects for a period of one year from date of purchase. At our discretion we will either repair or replace faulty units. www.clinchfx.com We will not accept responsibility for failures in other connected equipment.
  • Page 2 Power Supply EP+ Description The EP+ is designed to operate from a 9V or 12V DC supply. Maximum allowed The EP+ is a clean boost that can boost a guitar signal by up to 18db. The volume voltage is 12V DC. control goes all the way to zero, allowing the EP+ to be used for Unity Gain if necessary.