Reboot Of The Recorder (Maintenance - Reboot); Download/Upload Of The Setup Data From/To The Recorder Setup Data Download/Upload (Maintenance - Setup Data Download/Upload) - Panasonic WJ-RT416 Operating Instructions Manual

Monitoring software digital disk recorder
Hide thumbs Also See for WJ-RT416:
Table of Contents

Advertisement

Reboot of the recorder (Maintenance – Reboot)
Select "Reboot" under "Maintenance" from the pop-up menu ( page 34).
→ The confirmation window will be displayed.
When the [OK] button on the confirmation window is clicked, the reconfirm window will be displayed. Click the [OK]
button on the reconfirm window to reboot the recorder. Connect to the recorder again after the reboot since the con-
nection between the recorder and the PC will be disconnected in the process of the reboot.
Important:
Before rebooting the recorder, make sure that the recorder is not in the process of recording, playback and copy-
ing.
Download/upload of the setup data from/to the recorder Setup Data Download/Upload
(Maintenance – Setup Data Download/Upload)
Select "Setup Data Download/Upload" under "Maintenance" from the pop-up menu ( page 34).
→ The "Setup Data Download/Upload" window will be displayed.
Download the setup data
Step 1
Click the [Download] button.
→ The "Save..." window will be displayed.
Step 2
Designate the directory in which the setup data is to be
downloaded (default name: RT4Set.bin), and then click
the [Save] button.
→ Download of the setup data will start.
Upload the setup data
Step 1
Click the [Choose File] button, and then select the setup
data to be uploaded.
Step 2
Click the [Upload] button.
→ Upload of the setup data will start.
Note:
The settings on the [Network setup] tab of the
"Communication Setup" window will not be overwrit-
ten even when the setup data is uploaded.
39

Advertisement

Table of Contents
loading

Table of Contents