Panasonic WORKIO DP-2000 Operating Instructions Manual page 67

I Ports Tab
Print to the following port(s)
Displays a list of ports that allows printing, their status (description), and printers connected to the ports.
/
Add Port...
Add or delete a new local port or a new network port.
button
Configure Port...
Configure the port that is selected. On a parallel port, wait time (in seconds) for retransmission is
specified.
Enable bidirectional support
On a printer, this setting enables reception of configuration data and status data from the computer. Be
sure to check this checkbox when installing the status monitor. Printing may be disabled without checking
this checkbox.
Enable printer pooling
Printer pooling allows outputting data from one logical printer to two or more printers. With printer
poolingenabled, a transmitted printing job is output to the first printer that allows printing.
• Specify time (seconds) waiting for the printer to be ready for printing. If a printer is not
NOTE
ready for printing after the specified time has elapsed, an error message is displayed.
If a timeout error occurs frequently upon printing a large size document, specify a
larger value here.
Installation and Configuration (Windows 2000)
button
Delete Port
67