Care & Maintenance; Cleaning; Using The Power Pod Cleaning Brush; Storing - Ninja ULTRA PREP PS100 Series Owner's Manual

CARE & MAINTENANCE

CLEANING

1 Separate all parts.
2 Hand-Washing: Wash the jar, splash
guard lid, and blades in warm, soapy
water. When washing the blades, use
a dishwashing utensil with a handle to
avoid direct hand contact with blades.
Handle the blades with care to avoid
contact with sharp edges. Rinse and
air-dry thoroughly.
Dishwasher: The jar, splash guard lid,
and blades are all dishwasher safe. It is
recommended that the blades be placed
on the top rack. Ensure the blades are
removed from the jar before placing in
the dishwasher.
3 Wipe the Power Pod clean with a
damp cloth.

USING THE POWER POD CLEANING BRUSH

1 Use the bristled end of the power pod
cleaning brush to gently remove any
debris from the base of the power pod.
2 Carefully use the pointed end of the
power pod cleaning brush to remove
stuck-on debris.
3 Gently rinse the power pod cleaning
brush after use and let air-dry.
NOTE: DO NOT use the power pod
cleaning brush to clean any part of the
Ninja® Ultra Prep®, except for the base
of the power pod.
10 ninjakitchen.com

STORING

1 Store the unit upright with the Total
Crushing® & Power Chopping Blade inside the
jar. Place the splash guard lid on top of the jar,
and the power pod on top of the splash guard
lid. Store the High-Speed Blade inside the
storage box, and the dough blade in a drawer.

RESETTING THE MOTOR THERMOSTAT

The unit features a unique safety system
that prevents damage to the unit's motor
and drive system should you inadvertently
overload it. If the appliance is overloaded,
the motor will stop. To reset the appliance,
follow the resetting procedure below:
1 Unplug the appliance from the
electrical outlet.
2 Remove the power pod and splash guard
lid and empty the container to ensure no
ingredients are jamming the blade assembly.
3 Allow the appliance to cool for
approximately 10 minutes.
4 Replace the splash guard lid and power
pod and plug the appliance into the
electrical outlet.
5 Proceed to use the appliance as
before, making sure not to exceed the
recommended maximum capacities.
ORDERING REPLACEMENT PARTS
To order additional parts and attachments,
visit ninjakitchen.com or contact Customer
Service at 1-877-646-5288.

HELPFUL TIPS

• For coarse chopping, use short, quick
pulses and monitor food texture.
• For mincing, chopping, and pureeing,
increase the length of pulses.
• To crush ice into snow, start by using
short pulses to break up large pieces,
then continue processing until snow
is achieved.
• The Total Crushing® & Power Chopping
Blade can be used to chop meat, fish,
vegetables, and more.
SOY BEAN DIP RECIPE
Prep: 10 minutes
Blade: High-Speed Blade
Pulsing time: 15 seconds
INGREDIENTS
740g dry soy beans
• For finer purees, dressings, and
extractions, use the High-Speed Blade.
• Cut larger ingredients into smaller pieces
to better fit them in the Ninja® Ultra Prep®.
When chopping harder foods like meat,
cut them into 1-inch cubes.
DIRECTIONS
1 Clean and dry jar and blade.
2 Place the High-Speed Blade into the Jar,
then add soy beans.
3 Pulse for 15 seconds.
ninjakitchen.com 11