Table of Contents
Advertisement
7.2. Changing a programme
When you want to change the program
while a washing program is running on.
Press Start/Pause button.
Once the program has stopped, use the
program selection button to select the
desired program.
Press the Start/Pause button to start
the newly selected program.
The newly selected program will
continue in the place of the previous
program.
7.3. Cancelling a programme
If you would like to cancel a program while
washing is continuing.
Press and hold the Start/Pause button
End light will flash during the cancelling
process. The machine will drain the water
inside for about 30 seconds.
After the End light has become
After
NOTE: Do not open the door until the
program finishes.
NOTE: At the end of the washing
program, you can leave the door of the
machine ajar to speed up the drying
process.
NOTE: If you open the door of the
machine or if power gets cut during the
washing cycle, the program will resume
once the door has been closed or the power
has recovered.
EN - 19
for 3 seconds.
press the On/Off button
to switch off the machine.
Unplug the appliance. Turn
.
off the water tap
Advertisement
Table of Contents
