Table of Contents
Advertisement
Remove the stoppers and tags from the new
4
ink film. Find the "T" shaped gear (blue).
Insert the blue core of the front ink film roll
5
into the right slot of the unit (
"T" shaped gear (blue) into the left slot of the
unit (
).
2
Insert the back ink film roll (
6
If the ink film is slack, tighten it by winding
the gear.
Incorrect
Close the back cover securely by pushing
7
down on the dotted area at both ends (
Close the front cover securely (
The following message will be displayed
while the unit is checking that there is no
slack on the ink film.
Display:
Note:
The ink film is completely safe to touch, and will not
rub off on your hands like carbon paper.
1
). Insert the
).
3
Correct
Tight
).
2
PLEASE WAIT
For fax advantage assistance, call 1-800-435-7329.
Stopper
New ink film
"T" shaped gear (blue)
"T" shaped
gear (blue)
2
Left
slot
Front ink
film roll
Ink film
1
).
2
Front cover
Display
Ink Film
Tags
Stopper
Back ink film roll
Right
3
slot
1
Blue core
Gear
Dotted area
1
Back cover
65
Hide quick links:
Advertisement
Table of Contents
