Signals; Signals On Motor Housing; Signals On Armrest Control Unit; Signals On Call-And-Park Station - Access Flow2A User Manual

Signals

6 Signals
6.1

Signals on motor housing

Signal
Constant blue light
No light
6.2

Signals on armrest control unit

Signal
Constant green light
Constant red light
Constant red light + fast
intermittent beeps
Flashing red light
Flashing red light + fast
intermittent beeps
2-tone beeps during 3
seconds, repeated every 13
seconds
Constant orange light
6.3

Signals on call-and-park station

Signal
Constant green light + slow
beeps (stairlift)
Flashing red light
Meaning
The stairlift is switched on.
The stairlift is switched off.
Meaning
The joystick has been operated and
the stairlift is moving or will move.
Malfunction.
The safety belt is not fastened.
The stairlift is switched off.
The stairlift has encountered an
obstacle and has stopped.
The stairlift is not on a charging
point.
Radio frequency interference by a
foreign device.
Meaning
The stairlift has been operated by
another control unit earlier.
The stairlift is already being
operated from another control unit.
Action
---
Switch on the stairlift using the
electronic lowering device.
Action
---
Switch the stairlift off and on
again. If the stairlift does not
respond, contact your supplier.
If the situation occurs while the
stairlift is moving, descend with
the electronic lowering device.
Fasten the safety belt.
Switch on the stairlift using the
electronic lowering device.
Move the stairlift in the opposite
direction to a parking point. Before
you use the stairlift, make sure
that the stairs are free of
obstacles.
Move the stairlift to a charging
point.
Action
Wait as the stairlift is about to
move in 10 seconds.
---
20