Table of Contents
Advertisement
Description
3.3.2.2
Automatic swivel seat
The stairlift is equipped with the patented ASL technology. "ASL", standing for "Advanced
Swivel and Leveling", makes the chair rotate while travelling up and down the stairs. The
technology offers the user maximum comfort. The swivels of the chair are individually
programmed in such a way that the user is always in the best possible seating position.
The simultaneous movement of the swivel and leveling module keeps the chair in a
horizontal position, independent of the angle the rail is inclining or declining. Additional stops and
swivel moments during the ride are avoided. The chair rotation at the bottom or top of the staircase
makes it easier to get on and off the stairlift. With the ASL technology, the stairlift can be installed in
small and narrow staircases while making sure that other persons can still walk the stairs. Remodeling
works at the staircase are not necessary.
Before you sit down or stand up, the chair will automatically turn into the required direction when you
control the stairlift with the armrest control unit or the call-and-park station. The chair can also turn
backward when you go upstairs and forward when you go downstairs.
Examples:
Sitting down
Arriving at the top
or the bottom of
the stairs
3.3.3
4-point seat belt
When using the harness for the first time, please follow these steps. After the initial adjustment of the
straps, it is only necessary to loosen and tighten the shoulder straps to use the safety belt.
First use
1.
Loosen all adjustable straps.
2. Sit down on the seat.
3. Move the shoulder straps over the shoulders.
4. Adjust the back strap until the cross point is on a comfortable place on the back and the belt
fits naturally over the shoulders.
5. Fasten the safety belt.
6. Adjust the belly belt parts by pulling the straps until they are tight, but comfortable.
7.
Adjust the shoulder parts by pulling the straps.
1.
Push the call button on the call-and-park station to park the stairlift and
turn the chair into the required position.
2. Unfold the seat.
3. Sit down on the seat.
4. Fasten the safety belt.
5. Push and hold the joystick on the armrest control unit to the left or to
the right to move the stairlift. The chair will turn back into the ride
position and start moving.
1.
Push and hold the joystick on the armrest control unit to the left or to
the right until you have arrived at the top or the bottom of the stairs.
The chair will turn automatically.
2. When you hear an audio signal, release the joystick on the armrest
control unit.
3. Release the safety belt.
4. Stand up from the seat.
5. Fold the seat.
6. Push the park button on the call-and-park station to park the stairlift at
a parking point.
13
Advertisement
Table of Contents
