Advertisement
TABLE OF CONTENTS
1.
SERVICING NOTES
2.
GENERAL
................................................................... 3
3.
DISASSEMBLY
......................................................... 4
4.
DIAGRAMS
4-1. Printed Wiring Boards – MAIN/POWER Section – ..... 7
4-2. Schematic Diagram – MAIN/POWER Section – ........... 9
4-3. Schematic Diagram – PANEL Section – ....................... 12
4-4. Printed Wiring Boards – PANEL Section – .................. 15
4-5. IC Pin Function Description ........................................... 17
5.
EXPLODED VIEWS
6.
ELECTRICAL PARTS LIST
MODEL IDENTIFICATION
– Back panel –
4-995-104-1 π : AEP, UK
4-995-104-2 π : Hong Kong, Singapore, Malaysia
4-995-104-3 π : Tourist
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK ! OR DOTTED
LINE WITH MARK ! ON THE SCHEMATIC DIAGRAMS
AND IN THE PARTS LIST ARE CRITICAL TO SAFE
OPERATION. REPLACE THESE COMPONENTS WITH
SONY PARTS WHOSE PART NUMBERS APPEAR AS
SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUB-
LISHED BY SONY.
................................................ 2
................................................ 19
............................... 21
SERVICING NOTES
POWER ON/OFF CONTROL
• As the power on/off control is made by the Tuner Unit (ST-
EX880/MS717), the POWER switch is not provided to this set.
Accordingly, for servicing, connect the set to the Tuner Unit
(ST-EX880/MS717). (Fig. 1)
(If the Tuner Unit (ST-EX880/MS717) is not available, connect
a power cord directly to this set. (Fig. 2)
Also, if the set is not connected to the Tuner Unit (ST-EX880/
MS717), to enter the TEST mode (LED CHECK mode), press
v button and
FUNCTION
taneously two times.
When each button is pressed, the LED associated with each but-
ton lights up.
Connection:
Set
Power cord attached to this set
– 2 –
SECTION 1
[SOURCE DIRECT]
SYSTEM CONTROL
terminal
Tuner Unit
(ST-EX880/
MS717)
Connector cable
(17P)
AC IN
terminal
Fig. 1
Set
Power cord
AC IN
Fig. 2
button simul-
AC IN
Advertisement
