Rear View Of The System - Dell VxRail E665 Installation And Service Manual

Hide thumbs Also See for VxRail E665:
Table of Contents

Advertisement

1. Drive activity LED indicator
2. Drive status LED indicator
3. Drive capacity label
Drive status indicator behavior is managed by Storage Spaces Direct. Not all drive status indicators may be used.
NOTE:
If the drive is in the Advanced Host Controller Interface (AHCI) mode, the status LED indicator does not turn on.
The following table describes the indicator codes:
Drive status indicator code
Blinks green twice per second
Off
Blinks green, amber, and then turns off
Blinks amber four times per second
Blinks green slowly
Solid green
Blinks green for three seconds, amber for three
seconds, and then turns off after six seconds

Rear view of the system

Item
Ports, panels, or slots
1
Serial port
2
iDRAC dedicated port
3
Ethernet ports (2)
4
PCIe expansion card riser
1A (slot 2)
5
PCIe expansion card riser
2 (slot 3)
Condition
Indicates that the drive is being identified or preparing for removal.
Indicates that the drive ready for removal.
NOTE:
The drive status indicator remains off until all drives are
initialized after the VxRail is turned on. Drives are not ready for removal
during this time.
Indicates that there is an expected drive failure.
Indicates that the drive failed.
Indicates that the drive is rebuilding.
Indicates that the drive is online.
Indicates that the rebuild stopped.
Icon
Description
Enables connecting a serial device to the system. For more
information, see the Dell VxRail™ E665, E665F, and E665N
Technical Specifications.
Enables remote access iDRAC.
Provides two embedded Ethernet ports. These NIC ports can also
be shared with iDRAC when iDRAC network settings is set to
shared mode.
For more information about the supported configurations, see the
Dell VxRail™ E665, E665F, and E665N Technical Specifications.
N/A
Use the expansion card riser to connect PCI Express expansion
cards. For more information on the expansion cards that are
supported on your system, see Dell VxRail™ E665, E665F, and
E665N Technical Specifications.
N/A
Use the expansion card riser to connect PCI Express expansion
cards. For more information on the expansion cards that are
supported on your system, see Dell VxRail™ E665, E665F, and
E665N Technical Specifications.
System overview
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vxrail e665fVxrail e665n

Table of Contents