QSC ISIS WideLine WL 2102 User Manual
Hide thumbs
Also See for ISIS WideLine WL 2102:
- User manual (56 pages) ,
- User manual (14 pages) ,
- User manual (12 pages)
Related Manuals for QSC ISIS WideLine WL 2102
Summary of Contents for QSC ISIS WideLine WL 2102
- Page 1 ISIS WideLine Loudspeaker User Manual Model WL 2102 *TD-000188-00* TD-000188-00 rev.A...
-
Page 2: Important Safety Precautions
QSC Audio Products 3 Year Limited Warranty QSC Audio Products, Inc. (“QSC”) guarantees its products to be free from defective material and / or workmanship for a period of three (3) years from date of sale, and will replace defective parts and repair malfunctioning products under this warranty when the defect occurs under normal installation and use - provided the unit is returned to our factory or one of our authorized service stations via prepaid trans- portation with a copy of proof of purchase (i.e., sales receipt). - Page 3 The software is available sepa- systems. rately; downloadable from the QSC website or contact QSC for more information. Wide dispersion is accomplished with a 3” (76mm) diaphragm, 1.4” (36mm) exit neodymium high-frequency driver mounted...
- Page 4 Three way Active/Two way Active Switch Two way active: The “full range” LF input is applied to pins 1+ and 1- and the -6dB per octave shading network is applied to one of the LF transducers using the Low Frequency Select switch (above). Three way active: Shading network is NOT applied (shading must be provided by upstream signal pro- cessing).
-
Page 5: Input Connections
Input Connections The input connectors are a pair of Neutrik NL8's wired in parallel. Connections for biamp and tri- amp vary, see Table 1. The pin designations for the NL8FC cable connector is shown for reference, bottom right. Note! In three way mode, the Low Frequency Select switch position determines the input connector wiring! Unexpected results may occur if switch positions and wir- ing are not strictly controlled. - Page 6 Rigging CAUTION: SUSPENDING SPEAKERS PRESENTS A RISK OF SERIOUS INJURY OR DEATH. PLEASE USE CAUTION TO ASSURE THAT MOUNTING SURFACES ARE CAPABLE OF SUPPORTING AT LEAST Front Articulated FIVE TIMES THE WEIGHT OF THE SPEAKER AND MOUNTING APPARATUS. Joint- Slide the joint USE ONLY LOAD RATED HARDWARE.
- Page 7 Adjusting the Angle Between Enclosures (Splay) The illustration shows the rear pin block of two enclo- sures joined by the upper enclosure’s rear link arm. Use the first pin location (closest to the end) on the link arm for setting in normalized 2° increments. The left- side example shows two enclosures linked for 8°...
- Page 8 Use only 5/16” diameter x 1.25” long ball-lock pins on front receiver tubes. The small frame will easily handle four enclosures and will interface with the QSC 215PCM or 215SB subwoofer in both a stacked or flown configuration. The stacking bumpers on the frame may need to be moved to the opposite side of the frame member for use. The...
- Page 9 Stacking the Small Array Frame The small array frame comes with two aluminum I-bars used for aligning and securing the frame to QSC’s “215” subwoofer. To use the I-bars, simply slide each one into the small frame’s L-track and secure with a stud fitting. Then, turn the frame over (I-bars on the bottom) and slide the exposed I-bars into the subwoofer’s L-track.
- Page 10 Frame weight 84lbs. / 38.1kg Software EASE Focus line array modeling software tool available; visit www.qscaudio.com or contact QSC’s Technical Services for DSP files for both QSControl.net and Signal Manager Ball-lock Pins 5/16” dia. x 0.75” long, t-handle: p-n SR000052-00...
- Page 11 Dimensions...
-
Page 12: How To Contact Qsc Audio Products
QSC Audio Products 3 Year Limited Warranty QSC Audio Products, Inc. ("QSC") guarantees its products to be free from defective material and / or workmanship for a period of three (3) years from date of sale, and will replace defective parts and repair malfunctioning products under this warranty when the defect occurs under normal installation and use - provided the unit is returned to our factory or one of our authorized service stations via pre- paid transportation with a copy of proof of purchase (i.e., sales receipt).