Download
Share
Print this page
QSC WL2102 User Manual
  1. Manuals
  2. Brands
  3. QSC Manuals
  4. Speakers
  5. WL2102
  6. User manual
QSC WL2102 User Manual

QSC WL2102 User Manual

Isis wideline loudspeaker
Hide thumbs Also See for WL2102:

Advertisement

Quick Links

Download this manual See also: User Manual
ISIS WideLine Loudspeaker User Manual
Manual del usuario para los altavoces ISIS WideLine
Manuel de l'utilisateur des haut-parleurs ISIS WideLine
ISIS WideLine-Lautsprecher – Benutzerhandbuch
ISIS WideLine 扬声器用户手册
WL2102
WL2102-w
Stacking Frame
Fly Grid
*TD-000227-00*
Cored Composite Enclosure
Birch Plywood Enclosure
TD-000227-00 rev.B

Advertisement

loading

Related Manuals for QSC WL2102

Summary of Contents for QSC WL2102

  • Page 1 ISIS WideLine Loudspeaker User Manual Manual del usuario para los altavoces ISIS WideLine Manuel de l'utilisateur des haut-parleurs ISIS WideLine ISIS WideLine-Lautsprecher – Benutzerhandbuch ISIS WideLine 扬声器用户手册 WL2102 Cored Composite Enclosure WL2102-w Birch Plywood Enclosure Stacking Frame Fly Grid *TD-000227-00*...

  • Page 2: Important Safety Precautions

    QSC Audio Products 3 Year Limited Warranty QSC Audio Products, Inc. (“QSC”) guarantees its products to be free from defective material and / or workmanship for a period of three (3) years from date of sale, and will replace defective parts and repair malfunctioning products under this warranty when the defect occurs under normal installation and use - provided the unit is returned to our factory or one of our authorized service stations via prepaid trans- portation with a copy of proof of purchase (i.e., sales receipt).
  • Page 3 WL2102 enclosures are constructed of lightweight cored-com- posite and weigh 70 lb (31.8 kg). WL2102-w enclosures are constructed of birch plywood and weigh 83 lb (37.7 kg). The hardware allows for simple vertical splay angle adjustment of 0, 2, 3, 4, 5, 6, 7, 8, 9, and 10°...
  • Page 4 TRI AMP/BI AMP Switch TRI AMP: Shading network is NOT applied (shading must be provided by upstream signal processing). Connect the full- range input signal to pins 1+ and 1-, connect the shaded (pro- cessed) signal to pins 2+ and 2-. To flip shaded transducer location, use the MF (UNSHADED) SELECT switch or alter sig- nal processing.

  • Page 5: Input Connections

    Input Connections The input connectors are a pair of Neutrik NL8's wired in parallel. Connections for bi amp and tri amp vary, see Table 1. The pin designations for the NL8FC cable connector is shown for ref- erence, bottom right. Note! In TRI AMP mode, the MF (UNSHADED) SELECT switch position deter- mines the input connector wiring! Unexpected results may occur if switch positions and wiring are not strictly controlled.

  • Page 6: Shock Loading

    Licensed Structural Engineer for clarification before proceeding with any suspension of the equipment. The data presented is based upon the listed component weights: Component Weight WL2102 70 lb (31.8 kg) WL2102-w 83 lb (37.7 kg) Fly Grid 87 lb (39.5 kg)
  • Page 7 Rigging WideLine enclosures use a three-point suspension system. The system consists of front, left/right, captive articulated joints and a single rear link bar. Articulation is in 2° incre- ments using the first location on the link bar. With the use of the second location, 1°...
  • Page 8 Adjusting the Angle Between Enclosures (Splay) The illustration shows the rear pin block of two enclosures joined by the upper enclosure’s rear link arm. Use the first pin location (closest to the end) on the link arm for setting in normalized 2° increments. The left-side example shows two enclosures linked for 8°...
  • Page 9 Fly Grid The mounting plate and link bar are located on the bottom side of the frame assembly. Use this link for attaching the rear of the first enclosure. The frame allows for up or down angle options for use with either stacking or suspending. The 4° “normal” locations on the link system will yield a net 0°...
  • Page 10 Stacking the Stacking Frame The Stacking Frame comes with two aluminum I-bars used for aligning and securing the frame to QSC’s 215SB or 215PCM subwoofer. To use the I-bars, simply slide each one into the small frame’s L-track and secure with a stud fitting. Then, turn the frame over (I-bars on the bottom) and slide the exposed I-bars into the subwoofer’s L-track.
  • Page 11 Self contained rigging configuration. Front receiver tubes contain captive articulated joints (knuckle) and ball-lock pins on lanyards. Rear mounting block has integral mounting link and ball-lock pin on lanyard. WL2102: 70 lb (31.8 kg) Stacking Frame: For suspended or stacking applications on QSC’s 215SB or 215 PCM subwoofer.
  • Page 12 Dimensions- WL2102 and WL2102-w NOTE! Composite enclo- sures have approximately 1° of draft on the enclosure sides; the birch plywood enclosures do not. Handle orientation may vary between composite and plywood enclosures. 20.75” (527mm) 7.7” (196mm) 20.4” (518mm) 27.5” (699mm) 25.0”...

  • Page 14: How To Contact Qsc Audio Products

    QSC Audio Products 3 Year Limited Warranty QSC Audio Products, Inc. ("QSC") guarantees its products to be free from defective material and / or workmanship for a period of three (3) years from date of sale, and will replace defective parts and repair malfunctioning products under this warranty when the defect occurs under normal installation and use - provided the unit is returned to our factory or one of our authorized service stations via pre- paid transportation with a copy of proof of purchase (i.e., sales receipt).

This manual is also suitable for:

Wl2102-w