ABB ED83368-30 Quick Start Manual page 11

Micro-bdcbb dc battery distribution circuit breaker bay 600 a, −48v / +24v, 19” or 23”

QUICK START GUIDE

Delay

Clear Latched Events

Configuring the VIM1 For Controller Connectivity

The VIM1 has two shielded RJ45 connectors (figure 9) located on its top-rear that allow connecting the meter to a

ABB Galaxy Pulsar Plus or Galaxy Millennium 2 system controller through a cat-5 style communication cable. These

two system controllers can be part of a standard DC system where the controller is managing ABB rectifiers or in a

Standalone monitoring arrangement where there are no ABB system rectifiers but only ED83368 distribution

panels with VIM1s. The communication bus utilized is an internal RS485 operating with ABB's proprietary Galaxy

Protocol. Providing VIM1 connectivity to a system controller allows VIM information and alarms is to be managed

remotely.

Page 11

Figure 9 VIM1 Meter RS485 Connection

Micro-BDCBB_QSG

and Green

enabled to have a latched alarm.

Rev. 04

Table of Contents