Information led panel for rolling stock (21 pages)
Summary of Contents for Amit ALP5A2112/A1
Page 1
ALP5A2112/A1 Information LED panel for rolling stock Operation manual Version 1.03 alp5a2112a1_g_en_103...
Page 2
ALP5A2112/A1 AMiT, spol. s r. o. does not provide any warranty concerning the contents of this publication and reserves the right to change the documentation without obligation to inform anybody or authority about it. This document can be copied and redistributed under following conditions: 1.
ALP5A2112/A1 1. Introduction ALP5A2112/A1 is an external information LED panel intended to be built-in to rolling stock interior. Device is designed in accordance with EN 50155:2007 standard. LED panel is shipped from production with loader and AMiT software. (1008 × 192) mm ▪...
ALP5A2112/A1 2.1. Dimensions 1008 1042 Fig. 1 - Information panel ALP5A2112/A1 dimensions in mm 2.2. Recommended drawing symbol Following drawing symbol recommended information panel ALP5A2112/A1. ALP5A2112/A1 Fig. 2 - Recommended drawing symbol for ALP5A2112/A1 2.3. Temperature dependence Information panel is equipped with internal temperature sensor; depending on measured temperature is controlled the maximum brightness according to following table.
ALP5A2112/A1 3. Labelling Type identification label is placed on the back side of the ALP5A2112/A1 information panel. For exact location of label, see Fig. 3 - Labelling of ALP5A2112/A1 TYPE ALP5A2112/A1 AB12345 APP x.xx / LDR x.xx POWER: 16.8 to 33.6 V DC / 3 A WEIGHT: x.xx kg...
Page 10
ALP5A2112/A1 ALP5A2112/A1 TYPE AB12345 MAC: xx-xx-xx-xx-xx-xx APP x.xx / LDR x.xx POWER: 16.8 to 33.6 V DC / 3 A WEIGHT: x.xx kg TEST: OK-VS HiPot: HiPot - OK DATE: xx.xx.xxxx Fig. 4 - Example of manufacturer’s type plate alp5a2112a1_g_en_103...
ALP5A2112/A1 4. Conformity assessment The equipment meets the requirements of NV117/2016 Czech governmental decree. The compliance assessment with NV117/2016 has been performed in accordance with harmonized standard EN 50121-3-2:2006. Tested in accordance Type of test Classification with standard EN 55011:2009...
ALP5A2112/A1 4.1. Other tests This product was assessed and approved for use in railway applications according to standards: Tested in accordance Type of test Classification with standard Railway applications – Electronic EN 50155:2007 Complies equipment used on rolling stock S2, C1 Railway applications –...
ALP5A2112/A1 5. Power supply Information panel ALP5A2112/A1 is equipped with M12 A-coded, 4-pin connector labelled as PWR. It is used as a power supply connector. Note Matching counterpart is contained in package (Conec 43-00421). For proper contact connection use crimping tool 360X10329X with crimping insert 360X20069X.
▪ Ethernet ▪ Light sensor 6.1. Ethernet The 10/100 Mbps Ethernet interface allows connection of ALP5A2112/A1 computer to the LAN network. Panel computer ALP5A2112/A1 is fitted with one Ethernet interface with M12-4pin Harting push-pull connector. TYPE ALP5A2112/A1 AB12345 APP x.xx / LDR x.xx POWER: 16.8 to 33.6 V DC / 3 A...
ALP5A2112/A1 6.2. Light sensor Information panel is equipped with light sensor that is used for measuring of ambient light. Thanks to this sensor, information panel can regulate brightness to optimal value, according to ambient conditions. For panel correct operation the sensor must be exposed to the ambient light, and must not be covered anything.
ALP5A2112/A1 7. Mounting Information panel is designed to be mounted onto rail coach interior with four mounting holes located on the panel sides, or with four mounting holes located on the panel back. Information panel is attached by bolts, fastened to M6 nuts.
Certificate of product quality and completeness 8.2. Accessories Following accessories can be ordered: Part ID Part description Quantity 43-00421 Power supply connector counterpart Note *) For more information about storage sizes please contact technical support at email address support@amit.cz. 17/21 alp5a2112a1_g_en_103...
ALP5A2112/A1 9. Packaging Front panel Display area including front panel is protected by plastic foil against scratches protection and dirt. This foil is recommended to stay on the device during mounting to the vehicle and must be removed before using the device.
ALP5A2112/A1 10. Storage To prevent any damage to the device please keep the following rules. Packed The computer in the original box must be stored only under environmental computer conditions defined in technical parameters. The device must be kept away from water, oil or any other liquid which can damage the packing.
ALP5A2112/A1 11. Maintenance Warning Maintenance mentioned below can be performed only by manufacturer or authorized service. 11.1. Cleaning According to cleanliness of the environment, where the computer is installed, it is necessary to remove dust and dirt from the panel computer.
ALP5A2112/A1 12. Waste disposal Electronics The disposal of electronic equipment is subject to the regulations on handling disposal electrical waste. The equipment must not be disposed of in common public waste. It must be delivered to places specified for that purpose and recycled.
Need help?
Do you have a question about the ALP5A2112/A1 and is the answer not in the manual?
Questions and answers