Table of Contents
Advertisement
Perfect Connections
This is an example of recommended connection if your
TV has two 21-pin AV input (SCART) connectors.
Connect the decoder to the satellite receiver's connector
if you have a decoder, L-1 IN/OUT connector to TV's
connector, and L-2 IN/DECODER connector to the
satellite receiver's connector. Then connect the satellite
receiver and TV.
Satellite receiver
Decoder
Back of unit
Mains outlet
Outdoor unit
Aerial
Satellite cable
NOTES:
● Set "L-2 SELECT" to "A/V". (
● You can use Automatic Satellite Programme Recording
function (
pg. 35) with this connection. (S-VHS deck only)
● To record a programme via the satellite receiver, select L-2
mode by pressing AUX (number key "0") and/or PR so that
"L-2" appears on the front display panel. (S-VHS deck only)
● To receive a scrambled broadcast, descramble the signal with
the decoder connected to the satellite receiver.
● For details, refer to the instruction manual of the satellite
receiver and decoder.
21-pin SCART
connector
TV aerial cable
ANTENNA IN
ANTENNA OUT
EN
pg. 61)
Aerial
connector
Back of TV
67
Advertisement
Table of Contents
