4-3.
Install the Antennas
1. To install the antennas, please release the motherboard box firstly as steps
dscribed in chapter 3-3.
2. Screw the antennas tight to the Wi-Fi antenna connectors as shown.
4-4.
Install the PoE Module
When the PoE module is connected to motherboard, it would change to PoE mode.
There are two restrictions on PoE mode:
• No powered COM port
• Do not support 2
1. To install the PoE module, please
release the motherboard box
firstly as steps dscribed in chapter
3-3 (K737/K738/K739) and 3-4
(K736).
2. Attach a thermal pad onto the PoE
board.
3. Connect the PoE board to the
connector on the motherboard
side and then fasten the screws
(x2) provided.
nd
display
14