END TABLE ASSEMBLY INSTRUCTIONS MODEL # HFW-1545C5 please keep for future reference PARTS LIST 2PCS 2PCS 2PCS 2PCS 2PCS 2PCS DIMENSIONS : 21.6"(W)*15.7"(D)19.6"(H) 2PCS 2PCS 2PCS HARDWARE LIST 1 20PCS 2 20PCS 3 32PCS 4 4PCS 5 1PC 6 8PCS...
Page 7
ASSEMBLY INSTRUCTIONS Assembly Drawer's Runners (a.k.a. Rails, Glides, Slides or Guides) An assembly of ONE drawer requires two sets of runners. The runner is composed of an inner rail and outer slide. Please read completely first before assembling. Mounting the Inner Rail (Fixed) of the Runner: Before mounting, please determine which side of the panel is the front and rear.
Page 8
ASSEMBLY INSTRUCTIONS STEP : 2 Hardware 1 x 20 pcs Hardware 3 x 30 pcs Hardware 10 x 2 pcs Hardware 11 x 2 pcs Dowel hole Hardware 13 x 2 pcs Hardware 14 x 4 pcs Page 8 of 12...
Page 9
ASSEMBLY INSTRUCTIONS STEP : 3 Hardware 4 x 4 pcs STEP : 4 Hardware 2 x 8 pcs Finish Page 9 of 12...
Page 10
ASSEMBLY INSTRUCTIONS STEP : 5 Hardware 2 x 4 pcs Hardware 12 x 2 pcs Dowel hole STEP : 6 Hardware 2 x 4 pcs Hardware 6 x 8 pcs Page 10 of 12...
Page 11
ASSEMBLY INSTRUCTIONS STEP : 8 Extend the two outer slides of the runners so that they are align with the sides of the drawer. Make sure the pre-drilled holes from the drawer align with the screw Hardware 2 x 4 pcs holes of the outer slides.
Page 12
ASSEMBLY INSTRUCTIONS STEP : 9 Hardware 16 x 4 pcs STEP : 10 Make sure the unit is rested on a flat surface and does not feel loose or wobbly. If it does, double check all bolts/screws are secured and properly ASSEMBLY IS COMPLETED tightened.
Need help?
Do you have a question about the HFW-1545C5 and is the answer not in the manual?
Questions and answers