Table of Contents
Advertisement
System
2nd
3rd
DisplayPort Ver.
Input Port Ver.
Volume
Eco Saving Plus
Description
Select the DisplayPort version to use.
― Incorrect settings may cause the screen to go blank. If this occurs, check the device specifications.
Select an HDMI version.
― The supportable device and resolution may differ depending on its version.
― When the version is changed, the screen may blink.
― If you set the HDMI Mode to 1.4, some high resolutions may not be supported because of bandwidth limitation of the HDMI 1.4 protocol.
― When the setting is not appropriate, a blank screen may appear. In this case, check the specifications of the device.
Change the
Volume
setting.
The
Eco Saving Plus
function reduces power consumption by controlling the electric current used by the monitor panel.
•
Off: Deactivate the
Eco Saving Plus
function.
•
Auto: The power consumption will automatically be reduced by about 10% over the current setting.
(The reduction of power consumption depends on the customer screen brightness condition.)
•
Low: Saves up to 25 % energy compared to the maximum brightness.
•
High: Saves up to 50 % energy compared to the maximum brightness.
― This menu is not available when
Eye Saver Mode
― This menu is not available when
Game Mode
― This menu is not available when
Picture Mode
is enabled.
is enabled.
is set to
Dynamic Contrast
mode.
27
Advertisement
Table of Contents
