Auxiliary Functions - Sharp KD-HHH0S7EW2-FR User Manual

spin speed, environment conditions and voltage values.

5.2.1. Auxiliary Functions

The table that summarises the options that can be selected in programmes is given below.
Option
Drying Level
Anti-Crease
Delay Start
Buzzer Cancel
Time Drying
Child Lock
The humidity level obtained after drying can be increased by 3 levels. This way,
level of required dryness can be selected. The levels that can be selected other
than the standard setting: 1, 2, 3. After selection, the LED of the relevant drying
level will turn on.
If you select the "Anti-Crease" option and do not open the door of the dryer at the
end of the programme, the 1-hour anti-crease phase will extend to 2 hours. After
selecting the Anti Crease option, you will hear an audible warning. You can press
the same button again to cancel the option. If you open the door or press the Start/
Pause key while the anti-crease step is in progress, the said step will be cancelled.
You can delay the start time of the programme by selecting the 1-hour to 23-hour
option. You can activate the desired delay time by pressing the Start/Pause button.
When the time is up, the selected programme will start automatically. During the
delay time, options compatible with the programme can be activated/deactivated.
Long pressing on Delayed Start button changes delay time continuously.
The dryer gives an audible warning when program selection knob is turned,
buttons are pressed and at the end of programme. To cancel the warnings, press
and hold the "Anti-Crease Option" button for 3 seconds. When you press the
button, you will hear an audible warning that the option has been cancelled.
When knob is positioned to Time Drying programme, option can be selected by
pressing Time Drying option button and program starts by pressing Start/Pause
button. Long pressing on tme dyring button changes time continuously.
There is a child lock option to avoid changes in the programme flow when
keys are pressed during the programme. To activate child lock feature user
should press "Delay Start" and "Anticrease" buttons simultaneously for 3 sec.
When the child lock activated, all keys will be deactivated. Child lock is not
automatically deactivated at the end of the program. To deactivate the child lock
at end of the programme, set the programme selection knob to ''Off'' position.
Then set programme selection knob to first position. Child lock is still active. To
deactivate child lock , user should press "Delay Start" and "Anticrease" buttons
simultaneously for 3 sec. When activating/deactivating the child lock, ''CL'' will
visualize on display for 2 sec and then becomes off; and an audible warning will
be heard. Warning; when the product is running or the child lock is active, if you
turn the programme selection knob, you will hear an audible warning and ''CL'' will
visualize on display for 2 sec and then becomes off. If you turn the programme
selection knob, you will hear an audible warning. Even if you set the programme
knob to another programme, the previous programme will continue running. To
select a new programme, you need to deactivate the child lock and then set the
programme selection knob.
EN - 17
Description