Table of Contents
Advertisement
Chapter 16
16 1
Set System Time
System time is the time displayed while the mesh device is running. The system time
you configure here will be used for other time-based functions like Parental Controls
and Wireless Schedule. You can manually set how to get the system time.
Follow the steps below to set your system time.
1
Visit
http://tplinkwifi.net
set for the mesh device.
2
Go to
Advanced
3
Configure the system time using the following methods:
Get from PC:
Click this button if you want to use the current time of your PC.
Get from the Internet:
Make sure your mesh device can access the internet before you select this way to
get system time.
4
Click Save.
5
After setting the system time, you can set
needs. Enable
Daylight Saving
Save
to make the settings effective.
or http://192.168.88.1, and log in with the password you
>
System Tools
>
Time Settings
Click this button if you want to get time from the internet.
Time, and set the start and end time and then click
Manage Your Mesh Device
page.
Daylight Saving Time
according to your
128
Advertisement
Table of Contents
