Oven Interior Cleaning; Oven Lights - Sharp SSG3061JS Operation Manual

30" slide-in gas range
Hide thumbs Also See for SSG3061JS:
Table of Contents

Advertisement

TO CLEAN CONTROL PANEL
1 For best results and a prolonged life, clean the user interface
and control panel after each use. To remove knobs for easier
cleaning, ensure knobs are in the Off position, then pull
straight back with firm pressure to remove knob from stem.
2 Clean entire panel with a slightly damp, non-abrasive cloth,
using mild soap and water. Glass cleaner can be used on oven
control panel to remove streaks, and stainless-steel cleaner
can be used on exposed metal to remove streaks.
3 Handwash knobs in warm, soapy water.
4 Replace knobs, taking care to align the profile in the knob
to the stem shape to ensure a smooth fit and avoid damage
to knob or control.

OVEN INTERIOR CLEANING

CAUTION
BURN HAZARD
• Oven surfaces may be hot, and hot surfaces may create hot
steam in a wet sponge or cloth when cleaning. Use caution
to avoid contact with hot surfaces and if steam is evident,
wait until the oven has cooled completely.
TO CLEAN OVEN INTERIOR
1 For best results and a prolonged life, check oven after each
use for spills or spattering that require clean-up and wipe out
interior with a slightly damp, non-abrasive cloth, using mild
soap and water to remove light spills.
2 For moderate soil, use Steam Clean. For stubborn or heavy
soil, use Self Clean. See page 22.
CLEANING AND MAINTENANCE

OVEN LIGHTS

CAUTION
SHOCK, BURN, LACERATION HAZARDS
• Disconnect power to oven and allow oven to cool completely
before attempting to service light bulbs.
• Handle the glass lamp cover carefully. If the lamp cover is
difficult to remove, do not force it, as it may break. Contact
a qualified service provider for repairs.
• Never operate the oven without the glass lamp cover in place.
TO REPLACE OVEN LIGHT BULB
1 Locate oven lamps in the top of the oven, near the oven door.
2 Carefully unscrew the glass cover from the base. The light
bulb can be removed by firmly pulling straight out from the
light socket.
3 Replace the bulb only with G8 style 120V halogen bulb rated
25W or less.
4 Twist the glass cover back onto the lamp socket.
25
E

Advertisement

Table of Contents
loading

Table of Contents