Table of Contents
Advertisement
USER GUIDE
SAFETY • INSTALLATION & INTEGRATION • OPERATING INSTRUCTIONS • MAINTENANCE • SERVICE
CONTROL FUNCTION GUIDE
FUNCTION
ON/OFF
Toggle lights
Adjust refrigerator
temperature
View temperature in unit
Toggle between F/C
Toggle showroom mode
Service mode
ELECTRONIC CONTROL DESCRIPTIONS QUICK
GUIDE
Except as noted, these functions are available on all
models.
ON/OFF
1.
The ON/OFF mode allows the unit to be turned on and
off via the keypad. Push/release power key to toggle
ON/OFF. Internal lights will go off with power.
TOGGLE LIGHT
2.
On units with glass doors, touching the LIGHT key will
turn on the cabinet light for 3 hours at a time.
Touching the key again will turn the light off. Using the
cabinet light for more than 3 hours may be detrimental
to the cabinet temperature and product. Only available
on BEV, WC models.
NOTICE
This does not apply to ADA24R glass door units.
The light and display are always off when the
glass door is closed.
COMMAND
Press
and release
Press
and release to leave interior
light on for 3 hours
Press
or
and release
Press
and release the together
and
Hold
and
for five seconds
Push
and
and hold for five
seconds to enter the showroom mode.
Unplug the unit to deactivate showroom
mode.
Push and hold the hidden icon for 10
seconds to enter. Then push
to scroll through the service mode menu.
DISPLAY/OPTIONS
Unit will immediately turn ON or OFF
Glass door wine captains and beverage centers
only.
When the "F" or "C" in the display is flashing,
press
or
temperature.
The display will flash and then toggle from set
point to temperature in unit.
The display will change units.
Unit will not cool, but display and light are
operational.
and
The display will change units.
ADJUSTING THE SET POINT
3.
To adjust the set point press and release either the
WARMER or COLDER key. This will start the set point
flashing. While in this mode you can adjsut the set
point warmer or colder until the desired temperature is
reached. When adjustment is complete stop touching
the display and the set point will be saved in
approximately five seconds.
46
to adjust the set point
Control Operation - Service 2
Advertisement
Table of Contents
Troubleshooting
