4 .
Programming
Note:
After 30 seconds without a button press, the unit returns to normal operation.
4.1.
Basic programming
Note:
Menus are displayed in a defined and incremental order.
Model number selection
A
If necessary, press
→
Model number flashes.
B
Adjust model number to 1 with
C
Press
to validate the selection and advance to the next parameter using
.
Time setting
A
Press
when the time of the day is displayed.
→
Time flashes.
B
Adjust time with
→
Default setting: 12:00 AM.
C
Press
to validate the selection and advance to the next parameter using
.
Day of week
A
Press
when the day of week is displayed.
→
Day of week flashes.
B
Select displayed day with
C
Press
to validate the selection and advance to the next parameter using
.
Regeneration time
A
Press
when regeneration time is displayed.
→
Regeneration time flashes.
B
Adjust displayed time with
→
Default setting: 2:00am.
C
Press
to validate the selection and advance to the next parameter using
.
Hardness
A
Press
when hardness is displayed.
→
The hardness number flashes.
B
Adjust hardness with
→
Default hardness setting is 300 mg/L equivalent CaCO
C
Press
to validate the selection. Initial programming is now complete.
→
The controller will return to the normal operation mode.
Ref. MKT-UG-056 / A - 12.04.2023
when the model number is displayed.
and
.
and
.
and
.
and
.
and
.
User Guide Performa UF 269 / LOGIX 869
or ppm.
3
and
and
and
and
7 / 44