Subscribe to Our Youtube Channel
Related Manuals for LBX instruments H30SQC
Summary of Contents for LBX instruments H30SQC
- Page 1 H30SQC Digital Magnetic Stirrer with Heating Please read the User Manual carefully before use, and follow all operating and safety instructions! user manual english...
-
Page 2: Warranty
User Manual H30SQC Digital Magnetic Stirrer with Heating Preface Users should read this Manual carefully, follow the instructions and procedures, and beware of all the cautions when using this instrument. Service In order to guarantee this equipment works safely and efficiently, it must receive regular maintenance. In case of any faults, do not try to repair it yourself. -
Page 3: Safety Instructions
1. Safety Instructions Warning! ⚫ Read the operating instructions carefully before use. ⚫ Ensure that only trained staff works with the instrument. Risk of burn! ⚫ Caution when touching the housing parts and the hotplate, which can reach a temperature of 500 ℃. ⚫... -
Page 4: Proper Use
⚫ Do not apply pressure or overheat the media on the surface of the glass ceramic as this may cause it to break. ⚫ The instrument must only be opened by experts. ⚫ Keep the instrument away from high magnetic fields. 2. - Page 5 4. Control 4.1. Receiving Inspection Figure 2 Figure 3 Items Descriptions Temperature control Controls the heating function. knob Speed Control Knob Sets the rated rotary speed. Turns the stirring function ON or OFF. LED Heat Lights up when the heating function is turned ON. LED Stir Lights up when the stirring function is turned ON.
- Page 6 4.2. Display Figure 4 LCD digital model Display the temperature when the heating function is switched ON. Temp and ℃ Stir Display the stirring state when the stirring function is switched ON. Timer Display the timer parameter when the timer function is switched ON. Display an error message if an error occurs.
-
Page 7: Trial Run
5. Trial Run ⚫ Make sure the required operating voltage and power supply voltage match. ⚫ Ensure that the socket is properly grounded. ⚫ Plug in the power cable and ensure that the power is on to begin initializing. ⚫ Place the vessel on the work plate. ⚫... -
Page 8: Residual Heat Warning (Hot)
7. Residual Heat Warning (HOT) To prevent the risk of burns from the hotplate, the unit is equipped with a residual heat warning function. When the heating function is switched off and the heating plate temperature is still above 50°C, "HOT" will flash to warn of the hazard of burns from the hotplate. -
Page 9: Maintenance And Cleaning
9. Faults ⚫ The instrument cannot be powered ON: - Check whether the power line is unplugged. - Check whether the fuse is broken or loose. ⚫ Fault in power ON self-test: - Switch OFF the unit, then switch ON and reset the instruments to the factory default setting. ⚫... -
Page 10: Associated Standards And Regulations
11. Associated Standards and Regulations Construction in accordance with the following safety standards: EN 61010-1 UL 3101-1 CAN/CSA C22.2(1010-1) EN 61010-2-10 Construction in accordance with the following EMC standards: EN 61326-1 Associated EU guidelines: EMC- guidelines: 89/336/EWG Instrument guidelines: 73/023/EWG Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. -
Page 11: Specifications
12. Specifications Specifications Items LCD digital model Voltage [VAC], Frequency [Hz] 110V,60Hz / 220V,50Hz Power [W] *1400 Stirring point position quantity Max. stirring quantity (H O) [L] Max. magnetic bar [L×Ø, mm] 80×10 Motor type DC brushless motor Speed range [rpm] 100-1500 Rotary speed display Plate material... - Page 13 www.labbox.com...
Need help?
Do you have a question about the H30SQC and is the answer not in the manual?
Questions and answers