Adjust The Volume; Aux Operation; Troubleshooting - Horizon Fitness Acustico HAV-S2200 Operating Instructions Manual

- When the has unit no input signal (or weak input signal) for over 15 minutes, it will automatically switch to
Standby mode.

Adjust the Volume

- Press the + / - buttons on the unit to adjust the volume.
- While adjusting the volume, the status indicator flashes quickly.
- While the volume level reaches its maximum level, if you press the + button again, the status indicator
flashes once. While the volume level reaches its minimum level, if you press the - button again, the status
indicator flashes once.
1 Ensure that the unit is connected to the TV or audio device.
A. Use a 3.5mm to 3.5mm audio cable (included) to
connect the TV's or external audio device
headphone socket to the AUX socket on the unit.
B. Use a RCA to 3.5mm audio cable (not included) to
connect the TV's audio output sockets to the AUX socket
on the unit.
2 Press the button on the soundbar to switch the unit ON.
3 Operate your audio device directly for playback features.
4 Press the VOL +/– button to adjust the volume to your
desired level.
To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this
unit, review the following before requesting service.
No power
 Ensure that the AC cord is properly connected.
 Ensure that there is power at the AC outlet.
 Press standby button on the soundbar to turn the soundbar on.
I hear buzzing or humming
 Ensure all cables and wires are securely connected.
 Connect a different source device (TV, Blu-ray player, etc.) to see if the buzzing persists. If it does not,
the problem may be with the original device.
This is a 15 mins power off function, one of the ERPII standard requirement for saving
power
 When the unit's external input signal level is too low, the unit will be turned off automatically in 15
minutes. Please increase the volume level of your external device.
15

AUX Operation

Troubleshooting

Headphone
(not included)