Basic Operation; Standby/On; Select Modes; Adjust The Volume - Horizon Fitness ACUSTIC O HAV-S2860 Operating Instructions Manual

Standby/ON

When you first connect the main unit to the mains socket, the main unit will be in Standby mode.

Press the button on the unit or on the remote control to switch the unit ON.

Press the button again on the remote control or on the unit to switch the unit back to STANDBY

mode. The POWER indicator will light up red.
Disconnect the mains plug from the mains socket if you want to switch the unit OFF completely.

When there is no input signal (or weak input signal) in AUX, OPTICAL, HDMI ARC and Bluetooth (Stop

or Pause) for over 15 minutes, the unit will automatically switch to Standby mode.

Select Modes

Press the SOURCE button repeatedly on the unit or press the AUX, BT (Bluetooth), OPTICAL, COAXIAL, HDMI
ARC buttons on the remote control to select the desired mode.
• In Standby mode, the lights up Red.
• In AUX mode, the lights up Green.
In HDMI ARC mode, the Green lights flash.
• In Bluetooth mode, the lights up Blue.
• In OPTICAL mode, the lights up Orange.
In COAXIAL mode, the Orange lights flash.

Adjust the Volume

Press the VOL+ / VOL- buttons on the unit or on the remote control to adjust the volume.

If you wish to turn the sound off, press the MUTE button on the remote control. Press this button

again or press the VOL+ / VOL- buttons on the unit or on the remote control to resume normal
listening.
While adjusting the volume, the status indicator flashes quickly.

While the volume level reaches its maximum level, if you press the VOL+ button again, the status

indicator flashes once. While the volume level reaches its minimum level, if you press the VOL-
button again, the status indicator flashes once.

Select equalizer (EQ) effect

- While playing, press the EQ button on the remote control to select preset equalizers: Movie (recommended
for viewing movies), Music (recommended for listening to music), NEWS (recommended for listening to
NEWS).
NEWS: Green light flash
o
MOVIE: Orange light flash
o
MUSIC: Blue light flash
o

AUX/OPTICAL/COAXIAL/HDMI ARC Operation

1. Ensure that the unit is connected to the TV or audio device.
2. While in ON mode, press the SOURCE button repeatedly on the unit or press the AUX, OPTICAL, COAXIAL,
HDMI ARC buttons on the remote control to select the desired mode.
3. Operate your audio device directly for playback features.
4. Press the VOL +/– button to adjust the volume to your desired level.
25

Basic Operation