Precautionary Measures - Complete ProGrade C-7116S Manual

PRECAUTIONARY MEASURES

'Respect your tool and never horseplay'
- Always assume that the tool contains fasteners.
- Remove finger from the trigger when not driving fasteners. Never carry the tool with your finger on the
trigger, as the tool will fire a fastener if the trigger is bumped.
- Keep tool pointed in a safe direction at all times, never pointing it toward yourself or others whether it
contains fasteners or not.
- Never attempt to drive a fastener into material that is too hard, or at too steep an angle or near the edge of the
work piece, the fastener can ricochet causing personal injury. Remember, always hold nose right up to and
firmly against the work material.
- Disconnect the tool from the air supply before performing any maintenance, leaving the work area, moving to
another location, or handing the tool to another person.
- Always disconnect the tool before removing any jams.
- Carefully check the tool for proper operation of trigger mechanism. Do not use the tool unless the trigger and
any other of the operating control are functional. Do not use the tool if the tool is leaking air or needs repair.
- Written approval of the tool manufacturer must be obtained before making any modifications to the tool.
Complete * Schaumburg, IL 60173 * Phone: 888-392-9947
7