Basic Operations; Playback - Panasonic SA-XR55 Operating Instructions Manual

Basic operations

Playback

Various kinds of playback
n Playing DVD-Audio
Playing DVD ANALOG 6CH
You can enjoy high quality sound with DVD-Audio.
áRefer to page 5 for "DVD ANALOG 6CH connection".
Preparation:
• Turn SPEAKERS on.
DVD ANALOG 6CH only works when either SPEAKERS A or BI-WIRE
is on.
• Set the selector to "DVD ". (áabove)
• When you connect to a DVD recorder, playback is not possible if "DVR "
is selected for input. Select "DVD ".
Press and hold until "DVD 6CH " is displayed.
To cancel, press and hold until "DVD " is displayed.
• Speaker settings (ápages 12, 21) are ineffective. Change
the settings on the DVD player if necessary.
Enjoying high quality 2-channel sound
You can enjoy high quality stereo sound with 192 kHz 2-channel DVD-Audio.
1. Cancel the "DVD 6CH " setting.
2. Set the input signal to "ANALOG " in "Input signal
settings".
(ápage 13)
14
(áabove)
1
Turn on.
2
Turn SPEAKERS A on.
-When using a BI-WIRE connection-
• If you use a BI-WIRE connection for the front speakers, select
"BI-WIRE " in "Bi-wiring settings". (ápage 12)
3
Select input.
INPUT SELECTOR
• If "DVR " is selected, "DVD RECORDER " scrolls once on the
display.
• If you watch a DVD etc., change to video input on the television.
n Using a DVD recorder with built-in VCR
To play a DVD: Select "DVR "
To play a video cassette: Select "VCR 1 "
4
Start play of the source.
• The unit sets the sound mode (stereo or multi-
channel) to suit the input signal.
• Select the desired surround effects.
5
Adjust the volume.
DOWN
• When you finish listening
Be sure to reduce the volume and press [8, POWER] to turn the
unit to standby.
n Using SPEAKERS B
áRefer to page 8 for connecting SPEAKERS B.
Sound is output from the speaker connected to
the FRONT B terminals on this unit.
To turn off the sound from the speaker connected to the A terminals,
press [SPEAKERS A] and cancel
If you select SPEAKERS B only:
• Playback is in stereo (2-channel).
• When a multi-channel source is played with digital connections,
"2CH MIX" is displayed and the sounds intended for all the speakers are
played through the front speakers.
When DVD ANALOG 6CH is selected, the sound from the front 2 channels is output.
If you select SPEAKERS B only, the following are set automatically
irrespective of settings selected in speaker settings (ápages 12, 21).
• Speaker size: LARGE
• Subwoofer: NO
(Bass is output from the front speakers.)
n Using headphones
-When using a BI-WIRE connection-
When DVD ANALOG 6CH is selected, the sound from the front 2
channels is output.
POWER
SPEAKERS
A B
(ápage 15)
VOLUME
VOL- 50dB
UP
(MIN) (MAX)
.
A
Press to turn all the speakers off.
Reduce the volume and connect the
headphones. The sound from the
headphones automatically becomes
2CH MIX.