Advertisement
5. ASSEMBLY
MOUNT BRACKETS ONTO THE WALL
Step 1A
Mark out and drill holes in the wall for the anchors. Pay
attention to the distance between the holes.
ASSEMBLE THE FRAME
Step 2A
Fix the 4 frame connectors
to the two long beams with
M5 screws.
Fix the two long beams to the
two brackets with
M5 screws.
Step 3
Place wire shelf onto the frame.
© Jack Sealey Limited
Step 1B
Use the 4pcs of self tapping screws and 4pcs of washers to fix the left
and right side brackets onto the wall.
Step 2B
Slot the two cross beams into the two long beams.
Make sure they are properly located.
Original Language Version
Ready for use.
APWSR01
Issue 1
15/11/22
Advertisement
