EU conformity declaration
The producer/distributor
KEYBOARDPARTNER UG
Entwicklung elektronischer Musikinstrumente
Carsten Meyer
Ithweg 37, D-30851 Langenhagen
info@keyboardpartner.de
hereby declares, that the product
HX3.5 Drawbar Expander
has been designed, produced and examined in compliance with the DIN VDE 0580 standard and in
accordance with the EU Low Voltage Directive.
Following directives, standards and guidelines have been used:
EMV-Richtlinie 2014/30/EU
Niederspannungsrichtlinie 2014/35 EU
RoHS-Richtlinie 2011/65/EU
Langenhagen, November 2022
____________________________
Carsten Meyer / Geschäftsführer
2
HX3 Drawbar Expander
Please read this manual carefully before using the HX3 Drawbar
Expander.
Only use appropriate power supply as advised. Input voltages exceeding
15V may damage the device.
Designed for indoor use only. Do not use HX3 Drawbar Expander in moist
places. Do not spill liquids or solvents into unit.
No user-serviceable parts inside. Refer to qualified technician or service
representative if problems occur.
Only clean with damp soft cloth. Using detergents or solvents may
deteriorate finish and lettering.
Keep packaging in case of service shipment.
Need help?
Do you have a question about the HX3 Drawbar Expander and is the answer not in the manual?