Menu Overview; Presets - KEYBOARDPARTNER HX3 Drawbar Expander User Manual

Menu Overview

The HX3 menu is arranged in function groups and has two levels: The
green, contains the parameters that are frequently used. In the
function group, shown in blue, you will find parameters that are used less frequently.
Press the lower button to switch from a
the bottom right of the display. Press the upper button to return to the
The menus are arranged in a ring. The last menu item in the list is therefore followed by the first
again when you scroll down further, and the same applies vice versa.
Menu items that are only available with the Extended License are shown in italics in the following
overview. It also depends on which organ model is selected (default: B3). In the overview, a light
blue H marks menu items that only appear in H100 mode, and a red
available in EnvelopeGen (EG) mode.
As of firmware version 5.637, the menu is significantly shorter than in previous versions. Rarely
used parameters have been removed from the menu to improve clarity, but are still adjustable with
TouchOSC, with the Panel or with the Editor of the HX3 Manager. Please use this method for the
manifold settings in EG mode.
The editor can be used to remove other unwanted menu items from the menu or added to the
menu.

Presets

HX3 Preset: Selection of Common Presets 00 ... 99.
Common Presets include Drawbar settings and optionally Tab Switch settings (Percussion,
Vibrato etc.), Rotary Run/Fast/Slow, Master Volume, TubeAmpGain, and other effect settings. In
the HX3 Manager panel you can select which parameters are saved in presets.
Preset 0 determines the settings when the device is switched on. The drawbar and switch settings
are temporarily stored when another preset is called up and become effective again when preset 0
is selected again.

LED Dimmer: Brightness of the LEDs on connected boards and on the menu panel of the HX3
MIDI Expander (from mid 2020).

SD File Exec: Selection of a script file on the SD card when the SD card adapter is connected.

WiFi Init Def: Reset WLAN interface to factory default.

Preset Init: Sets the live preset 0 to a basic B3 organ sound.
10 HX3 Drawbar Expander
main menu to a submenu. An "S" symbol then appears at
main menu, shown in
submenu of the respective
main menu.
E marks menu items that are