Ebyte E70-915NW14S User Manual page 18

Table of Contents

Advertisement

Chengdu Ebyte Electronic Technology Co.,Ltd
" +++" enter AT Command
1
Example:+++
Note: 1. The AT command can be used only after entering the AT command mode
2. After entering the AT command mode, the AT command mode can be used again only after exiting the AT
command mode, reset or restart the module
3. When writing this command, the serial debugging assistant must be set not to send new lines; writing other AT
commands must be set to send new lines.
AT+EXIT Exit AT command mode
2
Example:AT+EXIT
Note: AT commands are invalid after exiting AT command mode
AT+CNCFG Set / Query device channel
3
Note: 1. In the long-distance mode and standard transmission mode, the frequency range is (908.2MHz ~ 920.8MHz), the
channel interval is 0.2MHz, and Fre = 908.2 + (Channel * 0.2);
In high-rate mode, the frequency range is 902.4MHz ~ 927.6MHz, the channel interval is 0.4MHz, and Fre = 902.4
+ (Channel * 0.4);
2. After setting the channel, the network information will be cleared
AT+ WMCFG Set / Query the device's working mode configuration (restart to take effect)
4
AT+ WMCFG =Value
Example:AT+ WMCFG =4
Note: 1. After setting a new mode, it needs to be reset or power off and restart
2. After setting the mode, the network information will be cleared
AT+DINFO Device information acquisition
5
AT+DINFO=SELFS
Chengdu Ebyte Electronic Technology Co.,Ltd
Copyright ©2012–2019,
+++
AT+EXIT
AT+CNCFG=?
AT+CNCFG=Value
AT+ WMCFG =?
Parameter specification:
Null
Response:
Enter AT Mode
Parameter specification:
Null
Response:
Exit AT Mode
Parameter specification:
Query the current working channel
Response:
Channel:0
Parameter specification:
Value:0~63 (Factory default parameter is 0)
Parameter specification:
Query the current working mode
Response:
WMCFG:4
Parameter specification:
Value:0~4
0,Coordinator;
1, Normal node;
2, Dormant Node;
3, Sleep mode;
4, Pin control (factory default)
Parameter specification:
Acquire its own short address and return it through the serial
port.
E70-915NW14S User Manual
17

Advertisement

Table of Contents
loading

Table of Contents